IEC TR 60825-14:2004
(Main)Safety of laser products - Part 14: A user's guide
Safety of laser products - Part 14: A user's guide
This technical report provides guidance on best practice in the safe use of laser products that conform to IEC 60825-1. The terms "laser product" and "laser equipment" as used in this document also refer to any device, assembly or system, which is capable of emitting optical radiation produced by a process of stimulated emission. However, unlike IEC 60825-1, this document does not cover light-emitting diodes (LEDs). Class 1 laser products normally pose no hazard and Class 2 laser products present only a minimal hazard. With these products, it is normally sufficient to follow the warnings on the product labels and the manufacturer's instructions for safe use. Further protective measures as described in this document should not be necessary. This document emphasizes evaluation of the risk from higher power lasers, but the users of the lower power lasers may benefit from the information contained. This technical report can be applied to the use of any product that incorporates a laser, whether or not it is sold or offered for sale. Therefore, it applies to specially constructed lasers (including experimental and prototype systems). This technical report is intended to help laser users and their employers to understand the general principles of safety management (Clause 3), to identify the hazards that may be present (Clauses 4 to 6), to assess the risks of harm that may arise (Clause 7), and to set up and maintain appropriate control measures (Clauses 8 to 11). Reference is made in this document to laser "users". This should be taken to include persons having responsibility for safety in addition to those who actually work with or operate laser equipment.
General Information
Relations
Standards Content (Sample)
TECHNICAL IEC
REPORT TR 60825-14
First edition
2004-02
Safety of laser products –
Part 14:
A user's guide
Reference number
IEC/TR 60825-14:2004(E)
---------------------- Page: 1 ----------------------
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:
Email: custserv@iec.ch
Tel: +41 22 919 02 11
Fax: +41 22 919 03 00
---------------------- Page: 2 ----------------------
TECHNICAL IEC
REPORT TR 60825-14
First edition
2004-02
Safety of laser products –
Part 14:
A user's guide
IEC 2004 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale XD
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
---------------------- Page: 3 ----------------------
– 2 – TR 60825-14 IEC:2004(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope and object.7
2 Terms and definitions .8
3 Administrative policies.16
3.1 Safety responsibilities.16
3.2 Competent persons.17
3.3 Laser Safety Officer .17
3.4 Information and training.18
4 Laser radiation hazards .19
4.1 Laser products.19
4.2 Exposure to laser radiation.23
4.3 Determining the level of laser exposure.23
5 Determining the maximum permissible exposure (MPE) .28
5.1 General remarks.28
5.2 Repetitively pulsed or modulated lasers .28
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.