iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 61375-2-8:2021 ED1

(Main)

Electronic railway equipment - Train communication network (TCN) - Part 2-8: TCN conformance test

Electronic railway equipment - Train communication network (TCN) - Part 2-8: TCN conformance test

IEC 61375-2-8:2021 applies to all equipment and devices implemented according to IEC 61375-2-3:2015, IEC 61375-2-5:2014 and IEC 61375-3-4:2014, i.e. it covers the procedures to be applied to such equipment and devices when the conformance should be proven. The applicability of this document to a TCN implementation allows for individual conformance checking of the implementation itself, and is a pre-requisite for further interoperability checking between different TCN implementations.

Matériel électronique ferroviaire - Réseau embarqué de train (TCN) - Partie 2-8: Essai de conformité TCN

IEC 61375-2-8:2021 s'applique à l'ensemble des équipements et dispositifs mis en œuvre conformément à l'IEC 61375-2-3:2015, l'IEC 61375-2-5:2014 et l'IEC 61375-3-4:2014, c'est-à-dire qu'elle couvre les modes opératoires à appliquer à ces équipements et dispositifs dont il convient de démontrer la conformité.

General Information

Status
Published
Publication Date
24-Oct-2021
ICS
45.060.01 - Railway rolling stock in general
Technical Committee
TC 9 - Electrical equipment and systems for railways
Drafting Committee
WG 43 - TC 9/WG 43
Current Stage
PPUB - Publication issued
Start Date
05-Nov-2021
Completion Date
25-Oct-2021
Ref Project

Buy Standard

IEC 61375-2-8:2021 - Electronic railway equipment - Train communication network (TCN) - Part 2-8: TCN conformance testIEC 61375-2-8:2021 - Electronic railway equipment - Train communication network (TCN) - Part 2-8: TCN conformance test
PreviousNext
Standard
IEC 61375-2-8:2021 - Electronic railway equipment - Train communication network (TCN) - Part 2-8: TCN conformance test
English language
356 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 61375-2-8
®

Edition 1.0 2021-10
INTERNATIONAL
STANDARD

colour
inside


Electronic railway equipment – Train communication network (TCN) –
Part 2-8: TCN conformance test
IEC 61375-2-8:2021-10(en)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2021 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 18 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.

---------------------- Page: 2 ----------------------
IEC 61375-2-8

®


Edition 1.0 2021-10




INTERNATIONAL



STANDARD








colour

inside










Electronic railway equipment – Train communication network (TCN) –

Part 2-8: TCN conformance test


























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 45.060.01 ISBN 978-2-8322-1035-5




  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – IEC 61375-2-8:2021 © IEC 2021
CONTENTS
FOREWORD . 14
INTRODUCTION . 16
1 Scope . 17
2 Normative references . 17
3 Terms, definitions, symbols and abbreviated terms . 19
3.1 Terms and definitions . 19
3.2 Symbols and abbreviated terms . 19
4 Conformance test: approach, requirements and boundaries . 20
4.1 Approach . 20
4.1.1 General . 20
4.1.2 Requirements . 20
4.1.3 Requirements declaration statements for an Item Under Test (IUT) . 22
4.2 Boundaries . 23
4.2.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 63190:2023(Main)
Railway applications - Fixed installations - Electric traction - Copper and copper alloy catenary wires for overhead contact line systems

IEC 63190:2023 specifies the characteristics of copper and copper alloy catenary wires for use on overhead contact lines. This document also covers auxiliary catenary wires. It establishes the product characteristics, the test methods, checking procedures to be used with the catenary wires, together with packing, ordering and delivery conditions.

  • Standard
    70 pages
    English and French language
    sale 15% off
IEC
IEC 63076:2019/AMD1:2023(Amendment)
Amendment 1 - Railway applications - Rolling stock - Electrical equipment in trolley buses - Safety requirements and current collection systems
  • Standard
    8 pages
    English and French language
    sale 15% off
IEC
IEC 62590-3-1:2022(Main)
Railway applications - Fixed installations - Electronic power converters - Part 3-1: AC traction applications - Electronic power compensators

IEC 62590-3-1:2022 specifies the requirements and test methods for electronic power compensators for 1AC traction systems. This equipment is used to improve electric power quality inside the electric traction system and/or at the interface to the 3AC power network, applying power electronics technology.
This document applies to equipment which is installed to achieve one or more of the following objectives as its function(s):
- to mitigate voltage fluctuation;
- to improve power factor;
- to reduce imbalance at the interface to the 3AC power network.
This document applies to equipment with all possible configurations to implement different technical solutions for compensation, but equipment consisting of only passive components is excluded.

  • Standard
    99 pages
    English and French language
    sale 15% off
IEC
IEC 62973-4:2021(Main)
Railway applications - Rolling stock - Batteries for auxiliary power supply systems - Part 4: Secondary sealed nickel-metal hydride batteries

IEC 62973-4:2021 applies to secondary sealed nickel-metal hydride battery technologies for auxiliary power supply systems used on rolling stock.
This document specifies the requirements of the characteristics and tests for the sealed nickel-metal hydride cells and supplements IEC 62973-1 which applies to any rolling stock types (e.g. light rail vehicles, tramways, streetcars, metros, commuter trains, regional trains, high speed trains, locomotives, etc.). Unless otherwise specified, the requirements of IEC 62973-1 apply. This document also specifies the requirements of the interface between the batteries and the battery chargers. This document is to be used in conjunction with IEC 62675, IEC 63115-1 and IEC 63115-2.

  • Standard
    55 pages
    English and French language
    sale 15% off
IEC
IEC 62973-2:2020(Main)
Railway applications - Rolling stock - Batteries for auxiliary power supply systems - Part 2: Nickel Cadmium (NiCd) batteries

IEC 62973-2:2020 applies to NiCd rechargeable batteries for auxiliary power supply systems used on railway vehicles. It is an extension of IEC 62973-1:2018 which specifies common requirements for all battery technologies of other parts of IEC 62973. Unless otherwise specified, the requirements of IEC 62973-1:2018 apply.
Battery systems described in this document are used in conjunction with charging systems onboard rolling stock, as described in IEC 62973-1:2018. Charging systems (e.g. LVPS, converters, etc.) are excluded from the scope of this document.
This document also specifies the design, operation parameters, safety recommendations, routine and type tests, as well as marking and designation. This document is used in addition to IEC 60623:2017 or IEC 62259:2003 for NiCd Cells.

  • Standard
    34 pages
    English language
    sale 15% off
IEC
IEC 61992-6:2006/AMD2:2020(Amendment)
Amendment 2 - Railway applications - Fixed installations - DC switchgear - Part 6: DC switchgear assemblies
  • Standard
    12 pages
    English language
    sale 15% off
IEC
IEC 62505-3-2:2020(Main)
Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 3-2: Measurement, control and protection devices for specific use in AC traction systems - Current transformers

IEC 62505-3-2:2020 is applicable to new current transformers which are:
- intended for use in indoor or outdoor fixed installations in traction systems, and
- operated with an AC line voltage and frequency as specified in IEC 60850.
This second edition cancels and replaces the first edition published in 2009.This edition includes the following significant technical changes with respect to the previous edition :
- this standard was revised to reflect the latest versions of standards referenced and to remove text already included in the IEC 61869 series.
- the structure of the document was adapted to that of IEC 62505‑1 and IEC 62505‑2.
- ratings have been added to provide designations in line with other railway standards, for example IEC 62497.
- test requirements have been detailed to meet operating conditions of railway applications.
- partial discharge voltages have been specified.

  • Standard
    14 pages
    English language
    sale 15% off
IEC
IEC 62505-3-1:2020(Main)
Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 3-1: Measurement, control and protection devices for specific use in AC tractions systems - Devices

IEC 62505-3-1:2020 is applicable to new low voltage devices for measurement, control and protection which are:
- for indoor or outdoor fixed installations in traction systems, and
- operated in conjunction with high voltage equipment with an AC line voltage and frequency as specified in IEC 60850.
This document also applies to measurement, control and protective devices other than low voltage devices and not covered by a specific railway product standard as far as reasonably possible. Requirements of this document prevail.
This second edition cancels and replaces the first edition published in 2009.  This edition includes the following significant technical changes with respect to the previous edition:
- distinguish between requirements and application guides
- include requirements on devices for example control and protection relays not included before;
- remove parts already included in other standards, for example EN 50633 for protection principles, which is intended to become an IEC standard.

  • Standard
    21 pages
    English language
    sale 15% off
IEC
IEC 62505-3-3:2020(Main)
Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 3-3: Measurement, control and protection devices for specific use in AC traction systems - Voltage transformers

IEC 62505-3-3:2020 is applicable to new voltage transformers which are:
- intended for use in indoor or outdoor fixed installations in tractions systems, and
- operated with an AC line voltage and frequency as specified in IEC 60850.
This document also applies to voltage transformers other than inductive types as far as reasonably possible. Requirements of this document have priority.
This second edition cancels and replaces the first edition published in 2009. This edition includes the following significant technical changes with respect to the previous edition:
This standard was revised to reflect the latest versions of standards referenced and to remove text already included in the IEC 61869 series.
The structure of the document was adapted to that of IEC 62505‑1 and IEC 62505‑2.
Ratings have been added to provide designations in line with other railway standards, for example IEC 62497.
Tests requirements have been detailed to meet operating conditions of railway applications.
Partial discharge voltages have been specified

  • Standard
    15 pages
    English language
    sale 15% off
IEC
IEC 60077-5:2019(Main)
Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses

IEC 60077-5:2019 is available as IEC 60077-5:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60077-5:2019 give additional or amended rules for high voltage (HV) fuses as a supplement to those given by IEC 60077-2. The high voltage fuses concerned are those connected into power and/or auxiliary circuits. The nominal voltage of these circuits lies between 600 V DC and 3 000 V DC, according to IEC 60850. These fuses can also be used in auxiliary AC circuits up to a nominal voltage of 1 500 V. This document together with IEC 60077-2 states specifically:
a) the characteristics of the fuses;
b) the service conditions with which the fuses comply with reference to:
- operation and behaviour in normal service;
- operation and behaviour in case of short circuit;
- dielectric properties.
c) the tests intended for confirming the compliance of the fuse with the characteristics under the service conditions and the methods adopted for these tests;
d) the information marked on, or given with, the fuse.
This second edition cancels and replaces the first edition, issued in 2003. This edition includes the following main technical changes with regard to the previous edition:
a) test method of test duty III for verification of breaking capacity is reviewed.

  • Standard
    58 pages
    English and French language
    sale 15% off