IEC 62899-402-2:2020
(Main)Printed electronics - Part 402-2: Printability - Measurement of qualities - Edge waviness
Printed electronics - Part 402-2: Printability - Measurement of qualities - Edge waviness
IEC 62899-402-2:2020(E) describes the measurement methods of the edge waviness of printed patterns in printed electronics.
This document includes the measurement procedure, as well as the definition of edge waviness and related attributes such as average edge, touch edge and distribution edge of edge waviness, which are quite different from those that appear in the printing of graphic arts or from etching processes.
General Information
Standards Content (Sample)
IEC 62899-402-2
®
Edition 1.0 2020-08
INTERNATIONAL
STANDARD
colour
inside
Printed electronics –
Part 402-2: Printability – Measurement of qualities – Edge waviness
IEC 62899-402-2:2020-08(en)
---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2020 IEC, Geneva, Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and definitions clause of
IEC publications issued between 2002 and 2015. Some
IEC Customer Service Centre - webstore.iec.ch/csc entries have been collected from earlier publications of IEC
If you wish to give us your feedback on this publication or TC 37, 77, 86 and CISPR.
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
---------------------- Page: 2 ----------------------
IEC 62899-402-2
®
Edition 1.0 2020-08
INTERNATIONAL
STANDARD
colour
inside
Printed electronics –
Part 402-2: Printability – Measurement of qualities – Edge waviness
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.180 ISBN 978-2-8322-8769-9
Warning! Make sure that you obtained this publication from an authorized distributor.
® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 3 ----------------------
– 2 – IEC 62899-402-2:2020 © IEC 2020
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Atmospheric conditions for evaluation and conditioning . 7
5 Measuring methods and instruments . 8
5.1 Image acquisition . 8
5.2 Measuring instrument. 8
5.3 Analysis software . 8
5.4 Preparation of image (specimen) . 9
5.5 Data collection and analysis . 9
5.6 Obtaining edge waviness and related attributes .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.