ISO/IEC 15693-3:2019
(Main)Cards and security devices for personal identification — Contactless vicinity objects — Part 3: Anticollision and transmission protocol
Cards and security devices for personal identification — Contactless vicinity objects — Part 3: Anticollision and transmission protocol
This document specifies: — protocols and commands; — other parameters required to initialize communications between a vicinity integrated circuit card and a vicinity coupling device; — methods to detect and communicate with one card among several cards ("anticollision"); — optional means to ease and speed up the selection of one among several cards based on application criteria. This document does not preclude the incorporation of other standard technologies on the card as described in Annex A.
Cartes et dispositifs de sécurité pour l'identification personnelle — Objets sans contact de voisinage — Partie 3: Anticollision et protocole de transmission
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 15693-3
Third edition
2019-04
Cards and security devices for
personal identification — Contactless
vicinity objects —
Part 3:
Anticollision and transmission
protocol
Cartes et dispositifs de sécurité pour l'identification personnelle —
Objets sans contact de voisinage —
Partie 3: Anticollision et protocole de transmission
Reference number
ISO/IEC 15693-3:2019(E)
©
ISO/IEC 2019
---------------------- Page: 1 ----------------------
ISO/IEC 15693-3:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2019 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 15693-3:2019(E)
Contents Page
Foreword .vi
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms, definitions, symbols and abbreviated terms . 1
3.1 Terms and definitions . 1
3.2 Symbols and abbreviated terms. 2
4 Definition of data elements . 3
4.1 UID . 3
4.2 AFI . 3
4.3 DSFID . 5
4.4 CRC . 5
4.5 Security framework . 6
5 VICC memory organization . 6
6 Block security status . 6
7 Overall protocol description . 7
7.1 Protocol concept . 7
7.2 Modes .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.