Micrographics — Use of bar codes on aperture cards

This International Standard specifies the type, dimensions, and positions of the coding on aperture cards that comply with ISO 3272-3. This International Standard is applicable to OCR characters, bar codes, Hollerith, and printed Hollerith codes. It is not applicable to compressed bar codes.

Micrographie — Emploi de codes à barres sur les cartes d'ouverture

General Information

Status
Published
Publication Date
30-May-2001
Current Stage
9093 - International Standard confirmed
Completion Date
04-Dec-2023
Ref Project

Buy Standard

Standard
ISO 12656:2001 - Micrographics -- Use of bar codes on aperture cards
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 12656
First edition
2001-06-01
Micrographics — Use of bar codes on
aperture cards
Micrographie — Emploi de codes à barres sur les cartes à fenêtre
Reference number
ISO 12656:2001(E)
©
ISO 2001

---------------------- Page: 1 ----------------------
ISO 12656:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2001 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 12656:2001(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 12656 was prepared by Technical Committee ISO/TC 171, Document imaging
applications, Subcommittee SC 2, Application issues.
Annex A forms a normative part of this International Standard.
© ISO 2001 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 12656:2001(E)
Introduction
Aperture cards are widely used for the storage and distribution of technical drawings and associated documents.
For more than twenty years, punched codes have been used to identify the cards. Recent developments in
encoding methods have led to the introduction of a number of printed codes that can be read by automated means.
These machine-readable codes are simpler to apply than punched codes and require less expensive equipment.
This International Standard has been prepared to ensure that machine-readable codes appear in a standard
position with standard dimensions on each card, to facilitate the use of these machine-readable codes in automatic
equipment.
iv © ISO 2001 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 12656:2001(E)
Micrographics — Use of bar codes on aperture cards
1 Scope
This International Standard specifies the type, dimensions, and positions of the coding on aperture cards that
comply with ISO 3272-3.
This International Standard is applicable to OCR characters, bar codes, Hollerith, and printed Hollerith codes. It is
not applicable to compressed bar codes.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this International Standard. For dated references, subsequent amendments to, or revisions of, any of these
publications do not apply. However, parties to agreements based on this International Standard are encouraged to
investigate the possibility of applying the most recent editions of the normative documents indicated below. For
undated references, the latest edition of the norm
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.