SIST EN IEC 61300-2-26:2023
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist (IEC 61300-2-26:2023)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist (IEC 61300-2-26:2023)
This part of IEC 61300 provides a test to determine the corrosion resistance of the metals used
in the construction of fibre optic interconnecting devices and passive components. This
document determines if dissimilar metals have been well finished to prevent corrosion. The
requirements of the tests for these devices are defined in IEC 61753-1.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-26: Prüfungen - Salznebel (IEC 61300-2-26:2023)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-26: Essais - Brouillard salin (IEC 61300-2-26:2023)
IEC 61300-2-26: 2023 fournit un essai pour la détermination de la résistance à la corrosion des métaux qui sont utilisés dans la construction des dispositifs d'interconnexion et des composants passifs. Le présent document détermine si la finition des métaux de nature différente est appropriée pour éviter la corrosion. Les exigences des essais pour ces dispositifs sont définies dans l'IEC 61753-1. Cette troisième édition annule et remplace la deuxième édition parue en 2006. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) ajout de l'Article 3, Termes et définitions;
b) harmonisation avec l'IEC 61753-1:2018 et ajout du Tableau 2;
c) harmonisation avec l'IEC 60068-2-11:2021.
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-26. del: Preskusi - Slana megla (IEC 61300-2-26:2023)
Ta del standarda IEC 61300 podaja preskus za določanje odpornosti proti koroziji pri kovinah, ki se uporabljajo pri izdelavi optičnih spojnih elementov in pasivnih komponent. Ta dokument določa, ali so bile neenake kovine dobro obdelane za preprečevanje korozije. Zahteve preskusov za te naprave so določene v standardu IEC 61753-1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61300-2-26:2023
01-oktober-2023
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 2-26. del: Preskusi - Slana megla (IEC 61300-2-26:2023)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-26: Tests - Salt mist (IEC 61300-2-26:2023)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-26: Prüfungen - Salznebel (IEC 61300-2-26:2023)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-26: Essais - Brouillard salin (IEC 61300
-2-26:2023)
Ta slovenski standard je istoveten z: EN IEC 61300-2-26:2023
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61300-2-26:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61300-2-26:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 61300-2-26:2023
EUROPEAN STANDARD EN IEC 61300-2-26
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2023
ICS 33.180.20 Supersedes EN 61300-2-26:2007
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 2-26: Tests - Salt
mist
(IEC 61300-2-26:2023)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Procédures fondamentales d'essais et de Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-
mesures - Partie 2-26: Essais - Brouillard salin 26: Prüfungen - Salznebel
(IEC 61300-2-26:2023) (IEC 61300-2-26:2023)
This European Standard was approved by CENELEC on 2023-08-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61300-2-26:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61300-2-26:2023
EN IEC 61300-2-26:2023 (E)
European foreword
The text of document 86B/4764/FDIS, future edition 3 of IEC 61300-2-26, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61300-2-26:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-05-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-08-23
document have to be withdrawn
This document supersedes EN 61300-2-26:2007 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61300-2-26:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 61300-3-4 NOTE Approved as EN IEC 61300-3-4
IEC 61300-3-6 NOTE Approved as EN 61300-3-6
IEC 61753-1:2018 NOTE Approved as EN IEC 61753-1:2018 (not modifi
...
SLOVENSKI STANDARD
oSIST prEN IEC 61300-2-26:2022
01-december-2022
Naprave za spajanje optičnih vlaken in pasivne komponente - Osnovni preskusni
in merilni postopki - 2-26. del: Preskusi - Slana megla
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-26: Tests - Salt mist
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-26: Prüfungen - Salznebel
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-26: Essais - Brouillard salin
Ta slovenski standard je istoveten z: prEN IEC 61300-2-26:2022
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 61300-2-26:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61300-2-26:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61300-2-26:2022
86B/4658/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61300-2-26 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-10-14 2023-01-06
SUPERSEDES DOCUMENTS:
86B/4553/CD, 86B/4587A/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Fibre optic interconnecting devices and passive components - Basic test and measurement
procedures - Part 2-26: Tests - Salt mist
PROPOSED STABILITY DATE: 2032
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61300-2-26:2022
IEC CDV 61300-2-26/Ed3 © IEC 2022 2 86B/4658/CDV
1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 5
4 2 Normative references . 5
5 3 Terms and definitions . 5
6 4 General description . 5
7 5 Salt solution . 6
8 5.1 Preparation of salt solution . 6
9 5.2 pH adjustment . 6
10 5.3 Filtration . 6
11 5.4 Re-use . 6
12 6 Apparatus . 6
13 6.1 Chamber . 6
14 6.2 Atomizer . 7
15 6.3 Air supply . 7
16 6.4 Collecting devic
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.