oSIST prEN ISO 14460:2023

SLOVENSKI STANDARD
oSIST prEN ISO 14460:2023
01-april-2023
Nadomešča:
SIST EN ISO 14460:2000
SIST EN ISO 14460:2000/A1:2002
Varovalna obleka za voznike dirkalnih avtomobilov - Zaščita pred učinki toplote in
plamena - Zahtevane lastnosti in preskusne metode (ISO/DIS 14460:2023)
Protective clothing for automobile racing drivers - Protection against heat and flame -
Performance requirements and test methods (ISO/DIS 14460:2023)
Schutzkleidung für Auto Rennfahrer - Schutz gegen Hitze und Feuer -
Leistungsanforderungen und Prüfverfahren (ISO/DIS 14460:2023)
Habillement de protection pour pilotes automobiles - Protection contre la chaleur et les
flammes - Exigences de performance et méthodes d'essai (ISO/DIS 14460:2023)
Ta slovenski standard je istoveten z: prEN ISO 14460
ICS:
13.340.10 Varovalna obleka Protective clothing
oSIST prEN ISO 14460:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 14460:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 14460:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14460
ISO/TC 94/SC 13 Secretariat: SNV
Voting begins on: Voting terminates on:
2023-01-25 2023-04-19
Protective clothing for automobile racing drivers —
Protection against heat and flame — Performance
requirements and test methods
Vêtements de protection pour pilotes automobiles — Protection contre la chaleur et le feu — Exigences de
performance et méthodes d'essai
ICS: 97.220.40; 13.340.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 14460:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 14460:2023
ISO/DIS 14460:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14460
ISO/TC 94/SC 13 Secretariat: SNV
Voting begins on: Voting terminates on:

Protective clothing for automobile racing drivers —
Protection against heat and flame — Performance
requirements and test methods
Vêtements de protection pour pilotes automobiles — Protection contre la chaleur et le feu — Exigences de
performance et méthodes d'essai
ICS: 97.220.40; 13.340.10
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 14460:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
oSIST prEN ISO 14460:2023
ISO/DIS 14460:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Design . 2
4.1 General . 2
4.2 Garments. 3
4.2.1 General . 3
4.2.2 Outer Garments . 3
4.2.3 Pockets and closures of outer garment . 3
4.2.4 Under garments . 4
4.2.5 Balaclava . 4
4.2.6 Socks. 4
4.2.7 Gloves . 4
5 Sampling and pre-treatment . .4
6 Testing. 5
6.1 Limited flame spread . 5
6.2 Convective heat . 5
6.2.1 Heat test . 5
6.2.2 Mechanical resistance after convective heat . 6
6.3 Heat resistance at a temperature . 6
6.4 The mechanical resistance of component assemblies after exposure to flame shall
be tested in accordance with the following test. . 6
6.5 Dimensional change of textile materials . 7
6.6 Tensile Strength of structural seams . 7
7 Marking . . 8
7.1 General . 8
7.2 Marking, specific. 8
7.3 Marking,. 8
8 Information supplied by the manufacturer . 8
Annex A (informative) Information for users . 9
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of EU Regulation 2016/425 of the European Parliament and of the
Council of 9 March 2016 on personal protective equipment aimed to be covered .10
iii
© ISO 2022 – All rights reserved

---------------------- Page: 5 ----------------------
oSIST prEN ISO 14460:2023
ISO/DIS 14460:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 94, Personal safety — Personal protective
equipment, Subcommittee SC 13, Protective clothing.
The intent of this document is to provide a standard for drivers of automobiles that do not fall within
the scope of the FIA. The intent is to provide a similar level of protection as FIA 8856.
This second edition cancels and replaces the first edition (ISO 14460:1999), which has been technically
revised.
The main changes are as follows:
— Terms and Definition, added new CEN & ISO Documents
— Normative references updated
— Annex ZA updated
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
  © ISO 2022 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 14460:2023
DRAFT INTERNATIONAL STANDARD ISO/DIS 14460:2022(E)
Protective clothing for automobile racing drivers —
Protection against heat and flame — Performance
requirements and test methods
1 Scope
This document specifies test methods, performance requirements and design parameters for clothing
for protection against heat and flame intended for drivers in automobile competitions. This document
concerns outer garments, under garments, socks, gloves and balaclava. Shoes and helmets are excluded.
The intent of this is to provide a standard for drivers of automobiles that do not fall within the scope of
the FIA. The intent is to provide a similar level of protection as FIA 8856
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 3175-1:2017, Textiles — Dry-cleaning and finishing — Part 1: Method for assessing the cleanability of
textiles and garments
ISO 3758:2012, Textiles — Care labelling code using symbols
ISO 4675:2017, Rubber- or plastics-coated fabrics — Low-temperature bend test
ISO 6330:2021, Textiles — Domestic washing and drying procedures for textile testing
ISO 9151:2016, Protective clothing against heat and flame — Determination of heat transmission on
exposure to flame
ISO 13688:2013, Protective clothing — General requirements
I S O 136 8 8:2013/A md1: 2021, Protective clothing — General requirements – Amendment 1
ISO 13935-1:2014, Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1:
Determination of maximum force to seam rupture using the strip method
ISO 15025:2016, Protective clothing — Protection against flame — Method of test for limited flame spread
ISO 17493:2016, Clothing and equipment for protection against heat — Test method for convective heat
resistance using a hot air circulating oven
ISO 23407:2021, Protective gloves against thermal risks (heat and/or fire)
ISO 5077:2007, Textiles — Determination of dimensional change in washing and drying
ISO 21420:2020, Protective gloves — General requirements and test methods
3 Terms and definitions
For the purposes of this document, the terms and definitions in ISO 11610 and the following apply.
1
© ISO 2022 – All rights reserved

---------------------- Page: 7 ----------------------
oSIST prEN ISO 14460:2023
ISO/DIS 14460:2022(E)
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
balaclava
one-piece garment designed to fit closely over the entire head and to extend downwards to cover the
neck
3.2
garment
single item of clothing which may consist of a single or multiple layers
3.4
outer garment
one-piece garment which is worn as an outermost layer over an under garment and which is designed
to entirely cover the wearer except for the head, hands and feet
3.5
under garment
garment which is designed to be worn between an outer garment and the wearer's body
3.6
component assembly
combination of materials of a multilayer garment, presented exactly as in the finished garment
construction
3.7
innermost layer
lining found on that face of the component assembly which is intended to be nearest to the wearer's skin
3.8
closure system
method of fastening openings in the garment including combinations of more than one method of
achieving a secure closure
EXAMPLE A slide fastener covered by an overflap fastened down with a touch and close fastener.
3.9
seam
junction of two edges of material which are permanently attached in the garment by sewing or any
other method
3.10
structural seam
seam which holds the outer garment together and which if broken would expose the under garments
and reduce the protection
4 Design
4.1 General
Any garment and its component shall meet the relevant requirements of ISO 13688 in addition to the
requirements set in this document. For gloves, these shall meet the requirements of ISO 21420.
Garment and glove sizes shall be in accordance with the requirements respectively of ISO 13688 and
ISO 21420.
2
  © ISO 2022 – All rights reserved

---------------------- Page: 8 ----------------------
oSIST prEN ISO 14460:2023
ISO/DIS 14460:2022(E)
4.2 Garments
4.2.1 General
All garments shall meet the requirements of Clause 6, unless specified differently in the subclauses
below.
NOTE Any garments worn underneath or above garments of this document need to have FR properties that
do not imperil the protective properties of the garments of this document.
4.2.2 Outer Garments
The outer garment sh
...