SIST EN ISO 15551-1:2015
(Main)Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2015)
Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2015)
This project is to develop a series of standards covering electrical submersible pumps and associated equipment. This International Standard provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings, functional evaluation, repair, handling and storage of electrical submersible pumps for downhole use in the petroleum and natural gas industry. Parts to this document series are expected to be pumps, motors, cables, motor seals, and system testing. The order in which the parts will be developed will be determined by the taskgroup.
Erdöl- und Erdgasindustrie - Bohrloch-Ausrüstungen - Teil 1: Elektrische Tauchpumpen zur Förderung (ISO 15551-1:2015)
Industries du pétrole et du gaz naturel - Équipement de forage et de production - Partie 1: Systèmes électriques de pompes submersibles pour l'ascension artificielle (ISO 15551-1:2015)
Industrija za predelavo nafte in zemeljskega plina - Proizvodna oprema za vrtanje - 1. del: Električne potopne črpalke za prečrpavanje na površino (ISO 15551-1:2015)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 15551-1:2015
01-julij-2015
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD3URL]YRGQDRSUHPD]DYUWDQMH
GHO (OHNWULþQHSRWRSQHþUSDONH]DSUHþUSDYDQMHQDSRYUãLQR ,62
Petroleum and natural gas industries - Drilling and production equipment - Part 1:
Electric submersible pump systems for artificial lift (ISO 15551-1:2015)
Erdöl- und Erdgasindustrie - Bohrloch-Ausrüstungen - Teil 1: Elektrische Tauchpumpen
zur Förderung (ISO 15551-1:2015)
Industries du pétrole et du gaz naturel - Équipement de forage et de production - Partie
1: Systèmes électriques de pompes submersibles pour l'ascension artificielle (ISO 15551
-1:2015)
Ta slovenski standard je istoveten z: EN ISO 15551-1:2015
ICS:
23.080 ýUSDONH Pumps
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
SIST EN ISO 15551-1:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 15551-1:2015
---------------------- Page: 2 ----------------------
SIST EN ISO 15551-1:2015
EUROPEAN STANDARD
EN ISO 15551-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2015
ICS 75.180.10
English Version
Petroleum and natural gas industries - Drilling and production
equipment - Part 1: Electric submersible pump systems for
artificial lift (ISO 15551-1:2015)
Industries du pétrole et du gaz naturel - Équipement de Erdöl- und Erdgasindustrie - Bohrloch-Ausrüstungen - Teil
forage et de production - Partie 1: Systèmes électriques de 1: Elektrische Tauchpumpen zur Förderung (ISO 15551-
pompes submersibles pour l'ascension artificielle (ISO 1:2015)
15551-1:2015)
This European Standard was approved by CEN on 5 March 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15551-1:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 15551-1:2015
EN ISO 15551-1:2015 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 15551-1:2015
EN ISO 15551-1:2015 (E)
Foreword
This document (EN ISO 15551-1:2015) has been prepared by Technical Committee ISO/TC 67 “Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries” in collaboration
with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2015, and conflicting national standards shall be withdrawn
at the latest by November 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tu
...
SLOVENSKI STANDARD
oSIST prEN ISO 15551-1:2014
01-januar-2014
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD3URL]YRGQDRSUHPD]DYUWDQMH
GHO (OHNWULþQHSRWRSQHþUSDONH]DSUHþUSDYDQMHQDSRYUãLQR ,62',6
Petroleum and natural gas industries - Drilling ans production equipment - Part 1: Electric
submersible pump systems for artificial lift (ISO/DIS 15551-1:2013)
Industries du pétrole et du gaz naturel- Équipement de forage et de production- Partie 1:
Systèmes électriques de pompes submersibles pour l'ascension artificielle (ISO/DIS
15551-1:2013)
Ta slovenski standard je istoveten z: prEN ISO 15551-1
ICS:
23.080 ýUSDONH Pumps
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
oSIST prEN ISO 15551-1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 15551-1:2014
---------------------- Page: 2 ----------------------
oSIST prEN ISO 15551-1:2014
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15551-1
ISO/TC 67/SC 4 Secretariat: ANSI
Voting begins on: Voting terminates on:
2013-08-29 2014-01-29
Petroleum and natural gas industries — Drilling ans
production equipment —
Part 1:
Electric submersible pump systems for artificial lift
Industries du pétrole et du gaz naturel — Équipement de forage et de production —
Partie 1: Systèmes électriques de pompes submersibles pour l’ascension artificielle
ICS: 75.180.10
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 15551-1:2013(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2013
---------------------- Page: 3 ----------------------
oSIST prEN ISO 15551-1:2014
ISO/DIS 15551-1:2013(E)
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as
permitted under the applicable laws of the user’s country, neither this ISO draft nor any extract
from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2013 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 15551-1:2014
ISO 15551-1
Contents Page
Foreword . vii
Introduction . vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols and abbreviated terms . 13
5 Functional specification .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.