SIST EN ISO 5211:2023
(Main)Industrial valves - Part-turn actuator attachments (ISO 5211:2023)
Industrial valves - Part-turn actuator attachments (ISO 5211:2023)
ISO 5211:2017 specifies requirements for the attachment of part-turn actuators, with or without gearboxes, to industrial valves.
The attachment of part-turn actuators to control valves in accordance with the requirements of this document is subject to an agreement between the supplier and the purchaser.
ISO 5211:2017 specifies:
- flange dimensions necessary for the attachment of part-turn actuators to industrial valves [see Figures 1 a) and 1 c)] or to intermediate supports [see Figures 1 b) and 1 d)];
- driving component dimensions of part-turn actuators necessary to attach them to the driven components;
- reference values for torques for interfaces and for couplings having the dimensions specified in this document.
The attachment of the intermediate support to the valve is out of the scope of this document.
Industriearmaturen - Anschlüsse von Drehantrieben für Armaturen (ISO 5211:2023)
Dieses Dokument legt Anforderungen an die Befestigung von Schwenkantrieben mit oder ohne Getriebe an Industriearmaturen fest.
Die Befestigung von Schwenkantrieben an Regelarmaturen nach den Anforderungen in diesem Dokument unterliegt einer Vereinbarung zwischen dem Lieferanten und dem Käufer.
Dieses Dokument legt Folgendes fest:
— notwendige Flanschmaße für die Befestigung von Schwenkantrieben an Industriearmaturen [siehe Bild 1a) und Bild 1c)] oder an Zwischenstücken [siehe Bild 1 b) und Bild 1 d)];
— notwendige Maße der Antriebskomponenten von Schwenkantrieben für ihre Befestigung an den angetriebenen Komponenten;
— Referenzwerte für Drehmomente für Schnittstellen und Kupplungen mit den in diesem Dokument festgelegten Maßen.
Die Befestigung des Zwischenstücks an derArmatur liegt nicht im Anwendungsbereich dieses Dokuments.
Robinetterie industrielle - Raccordement des actionneurs à fraction de tour (ISO 5211:2023)
ISO 5211:2017 spécifie les spécifications pour le raccordement des actionneurs à fraction de tour, avec ou sans réducteur, aux appareils de robinetterie industrielle.
Le raccordement des actionneurs à fraction de tour aux robinets de régulation conformément aux spécifications du présent document est soumis à accord entre le fournisseur et l'acheteur.
ISO 5211:2017 spécifie:
- les dimensions des brides nécessaires pour le raccordement des actionneurs à fraction de tour aux appareils de robinetterie industrielle [voir Figures 1 a) et 1 c)] ou aux supports intermédiaires [voir Figures 1 b) et 1 d)];
- les dimensions des éléments d'entraînement des actionneurs à fraction de tour nécessaires pour les raccorder aux éléments entraînés;
- les valeurs de référence des couples pour les interfaces et les éléments d'accouplement dont les dimensions sont spécifiées dans le présent document.
Le raccordement du support intermédiaire à l'appareil de robinetterie ne relève pas du domaine d'application du présent document.
Industrijski ventili - Pritrditve zasučnih pogonov na ventilih (ISO 5211:2023)
Standard ISO 5211:2017 določa zahteve za pritrditev zasučnih pogonov, z menjalnikom ali brez, na industrijske ventile.
Pritrditev zasučnih pogonov na krmilne ventile je v skladu z zahtevami tega dokumenta, če je predmet dogovora med dobaviteljem in kupcem.
Standard ISO 5211:2017 določa:
– dimenzije prirobnic, ki so potrebne za pritrditev zasučnih pogonov na industrijske ventile [glej sliki 1 a) in 1 c)] ali vmesne podpore [glej sliki 1 b) in 1 d)];
– dimenzije pogonskih komponent zasučnih pogonov, ki so potrebne za njihovo pritrditev na pogonske komponente;
– referenčne vrednosti za vmesnike in spojke z dimenzijami, določenimi v tem dokumentu.
Pritrditev vmesne podpore na ventil ne spada na področje uporabe tega dokumenta.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 5211:2023
01-december-2023
Industrijski ventili - Pritrditve zasučnih pogonov na ventilih (ISO 5211:2023)
Industrial valves - Part-turn actuator attachments (ISO 5211:2023)
Industriearmaturen - Anschlüsse von Drehantrieben für Armaturen (ISO 5211:2023)
Robinetterie industrielle - Raccordement des actionneurs à fraction de tour (ISO
5211:2023)
Ta slovenski standard je istoveten z: EN ISO 5211:2023
ICS:
23.060.01 Ventili na splošno Valves in general
SIST EN ISO 5211:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5211:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 5211:2023
EN ISO 5211
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2023
EUROPÄISCHE NORM
ICS 23.060.01 Supersedes EN ISO 5211:2017
English Version
Industrial valves - Part-turn actuator attachments (ISO
5211:2023)
Robinetterie industrielle - Raccordement des Industriearmaturen - Anschlüsse von Drehantrieben
actionneurs à fraction de tour (ISO 5211:2023) für Armaturen (ISO 5211:2023)
This European Standard was approved by CEN on 9 September 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5211:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 5211:2023
EN ISO 5211:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 5211:2023
EN ISO 5211:2023 (E)
European foreword
This document (EN ISO 5211:2023) has been prepared by Technical Committee ISO/TC 153 "Valves" in
collaboration with Technical Committee CEN/TC 69 “Industrial valves” the secretariat of which is held
by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2024, and conflicting national standards shall
be withdrawn at the latest by March 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 5211:2017.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 5211:2023 has been approved by CEN as EN ISO 5211:2023 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 5211:2023
---------------------- Page: 6 ----------------------
SIST EN ISO 5211:2023
INTERNATIONAL ISO
STANDARD 5211
Third edition
2023-09
Industrial valves — Part-turn actuator
attachments
Robinetterie industrielle — Raccordement des actionneurs à fraction
de tour
Reference number
ISO 5211:2023(E)
...
SLOVENSKI STANDARD
oSIST prEN ISO 5211:2023
01-julij-2023
Industrijski ventili - Pritrditve zasučnih pogonov na ventilih (ISO/FDIS 5211:2023)
Industrial valves - Part-turn actuator attachments (ISO/FDIS 5211:2023)
Industriearmaturen - Anschlüsse von Drehantrieben für Armaturen (ISO/FDIS
5211:2023)
Robinetterie industrielle - Raccordement des actionneurs à fraction de tour (ISO/FDIS
5211:2023)
Ta slovenski standard je istoveten z: prEN ISO 5211
ICS:
23.060.01 Ventili na splošno Valves in general
oSIST prEN ISO 5211:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 5211:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 5211:2023
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 5211
ISO/TC 153
Industrial valves — Part-turn actuator
Secretariat: AFNOR
attachments
Voting begins on:
2023-05-16
Robinetterie industrielle — Raccordement des actionneurs à fraction
de tour
Voting terminates on:
2023-08-08
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 5211:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 5211:2023
ISO/FDIS 5211:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 5211
ISO/TC 153
Industrial valves — Part-turn actuator
Secretariat: AFNOR
attachments
Voting begins on:
2023-05-16
Robinetterie industrielle — Raccordement des actionneurs à fraction
de tour
Voting terminates on:
2023-07-11
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 5211:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 5211:2023
ISO/FDIS 5211:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Maximum flange torques .2
5 Flange dimensions . 3
6 Designation .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.