Field testing of general ventilation filtration devices and systems for in situ removal efficiency by particle size and resistance to airflow (ISO 29462:2022)

This document describes a procedure for measuring the performance of general ventilation air cleaning
devices in their end use installed configuration. The performance measurements include removal
efficiency by particle size and the resistance to airflow. The test procedures include the definition and
reporting of the system airflow.
The procedure describes a method of counting ambient air particles of 0,3 μm to 5,0 μm upstream and
downstream of the in-place air cleaner(s) in a functioning air handling system. The procedure describes
the reduction of particle counter data to calculate removal efficiency by particle size.
Since filter installations vary dramatically in design and shape, a protocol for evaluating the suitability
of a site for filter evaluation and for system evaluation is included. When the evaluated site conditions
meet the minimum criteria established for system evaluation, the performance evaluation of the system
can also be performed according to this procedure.
This document also describes performance specifications for the testing equipment and defines
procedures for calculating and reporting the results. This document is not intended for measuring
performance of portable or movable room air cleaners or for evaluation of filter installations with an
expected filtration efficiency at or above 99 % or at or below 30 % when measured at 0,4 μm.

Betriebserprobung von Filtereinrichtungen und -systemen für die allgemeine Lüftung hinsichtlich ihrer Abscheideeffizienz im eingebauten Zustand bezogen auf die Partikelgröße und den Druckverlust (ISO 29462:2022)

Dieses Dokument beschreibt ein Verfahren zur Messung der Leistung von Vorrichtungen für die allgemeine Luftreinigung in deren endgültigem Einbauzustand. Die Leistungsmessungen umfassen den Abscheidegrad bezogen auf die Partikelgröße und den Strömungswiderstand. Die Prüfverfahren umfassen die Definition und die Angabe des Systemluftstroms.
Es wird eine Verfahrensweise beschrieben, bei der Partikel der Umgebungsluft mit einer Größe zwischen 0,3 µm und 5,0 µm auf der An- und der Abströmseite des/der an ihrem Ort befindlichen Luftreiniger(s) in einem ordnungsgemäß arbeitenden Luftbehandlungssystem gezählt werden. Beschrieben wird das Verfahren zur Verringerung der durch den Zähler ermittelten Partikel zum Zwecke der Berechnung des Abscheidegrads bezogen auf die Partikelgröße.
Da Filteranlagen sich hinsichtlich Auslegung und Form beträchtlich voneinander unterscheiden, ist ein Protokoll zur Bewertung der Eignung eines Standorts für die Bewertung des Filters und die Systembewertung enthalten. Sofern die bewerteten Standortbedingungen den für die Systembewertung festgelegten Mindestkriterien entsprechen, kann die Leistungsbewertung des Systems ebenfalls nach diesem Verfahren vorgenommen werden.
Dieses Dokument beschreibt auch die Leistungsspezifikationen für die Prüfausrüstung und definiert Verfahren für die Berechnung und Angabe der Ergebnisse. Dieses Dokument ist nicht dafür vorgesehen, die Leistung tragbarer oder ortsveränderlicher Raumluftreiniger zu messen oder Filteranlagen mit einem bei einer 0,4 µm zu erwartenden Abscheidegrad von mindestens 99 % oder höchstens 30 % zu bewerten.

Essais in situ de filtres et systèmes de ventilation générale pour la mesure de l'efficacité en fonction de la taille des particules et de la résistance à l'écoulement de l'air (ISO 29462:2022)

Le présent document décrit un mode opératoire de mesurage des performances des dispositifs de filtration de l'air des ventilations générales dans leur configuration installée d'utilisation finale. Les mesures de performance intègrent l'efficacité d'élimination en fonction de la taille des particules et de la résistance à l'écoulement de l'air. Les modes opératoires d’essais intègrent la définition et la consignation du flux d’air du système.
Le mode opératoire décrit une méthode de comptage des particules dans l'air ambiant de 0,3 μm à 5,0 μm en amont et en aval du ou des épurateurs d’air en place dans un système de traitement de l'air en fonctionnement. Le mode opératoire décrit la détermination des données du compteur de particules pour calculer l'efficacité d'élimination en fonction de la taille des particules.
Puisque les installations de filtration diffèrent considérablement par leur conception et leur forme, un protocole d'évaluation de l'adaptabilité d'un site à l'évaluation des filtres et à l’évaluation des systèmes a été inclus. Lorsque l'évaluation des conditions du site répond aux critères minimaux établis pour l'évaluation du système, l'évaluation des performances du système peut également être réalisée selon ce mode opératoire.
Le présent document décrit également les spécifications de performance des appareils d'essai et définit les modes opératoires de calcul et de consignation des résultats. Le présent document n'a pas vocation à mesurer les performances des épurateurs d’air portables ou mobiles ou à évaluer les installations de filtration à efficacité de filtration attendue égal ou supérieur à 99 % ou égal ou inférieur à 30 % dans le cas d'une mesure à 0,4 µm.

Terensko preskušanje splošnih prezračevalnih filtrirnih naprav in sistemov na kraju samem (kraju vgradnje) glede učinkovitosti odstranjevanja delcev po njihovi velikosti in glede upornosti proti zračnemu toku (ISO 29462:2022)

Ta dokument opisuje postopek za merjenje zmogljivosti splošnih prezračevalnih filtrirnih naprav v nameščenih konfiguracijah za končno uporabo. Meritve delovanja vključujejo učinkovitost odstranjevanja delcev po njihovi velikosti in upornosti proti zračnemu toku. Preskusni postopki vključujejo opredelitev
pretoka zraka v sistemu in poročanje o njem.
Postopek opisuje metodo štetja delcev v zunanjem zraku od 0,3 μm do 5,0 μm za uporabo proti toku in v smeri toka pri nameščenih čistilnikih zraka v delujočih sistemih za uravnavanje zraka. Postopek opisuje
zmanjševanje podatkov števca delcev za izračun učinkovitosti odstranjevanja glede na velikost delcev.
Filtrirne inštalacije se lahko po načrtu in obliki občutno razlikujejo, zato je vključen protokol za ocenjevanje primernosti mesta za ocenjevanje filtra in ocenjevanje sistema. Ko pogoji mesta ocenjevanja dosegajo minimalna merila, določena za ocenjevanje sistema,
se lahko po tem postopku izvede ocenjevanje delovanja sistema.
Ta dokument opisuje tudi specifikacije delovanja za preskusno opremo ter določa postopke za izračunavanje in poročanje rezultatov. Ta dokument ni namenjen za merjenje delovanja prenosnih ali premičnih čistilnikov zraka v prostorih ali za ocenjevanje filtrirnih inštalacij s pričakovano učinkovitostjo filtracije 99 % ali več oziroma 30 % ali manj pri merjenju delcev velikosti 0,4 μm.

General Information

Status
Published
Public Enquiry End Date
30-Jun-2020
Publication Date
12-Sep-2022
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
07-Sep-2022
Due Date
12-Nov-2022
Completion Date
13-Sep-2022

Relations

Buy Standard

Standard
EN ISO 29462:2022
English language
51 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 29462:2020
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 29462:2022
01-oktober-2022
Nadomešča:
SIST EN ISO 29462:2013
Terensko preskušanje splošnih prezračevalnih filtrirnih naprav in sistemov na
kraju samem (kraju vgradnje) glede učinkovitosti odstranjevanja delcev po njihovi
velikosti in glede upornosti proti zračnemu toku (ISO 29462:2022)
Field testing of general ventilation filtration devices and systems for in situ removal
efficiency by particle size and resistance to airflow (ISO 29462:2022)
Betriebserprobung von Filtereinrichtungen und -systemen für die allgemeine Lüftung
hinsichtlich ihrer Abscheideeffizienz im eingebauten Zustand bezogen auf die
Partikelgröße und den Druckverlust (ISO 29462:2022)
Essais in situ de filtres et systèmes de ventilation générale pour la mesure de l'efficacité
en fonction de la taille des particules et de la résistance à l'écoulement de l'air (ISO
29462:2022)
Ta slovenski standard je istoveten z: EN ISO 29462:2022
ICS:
13.040.20 Kakovost okoljskega zraka Ambient atmospheres
23.120 Zračniki. Vetrniki. Klimatske Ventilators. Fans. Air-
naprave conditioners
91.140.30 Prezračevalni in klimatski Ventilation and air-
sistemi conditioning systems
SIST EN ISO 29462:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 29462:2022

---------------------- Page: 2 ----------------------
SIST EN ISO 29462:2022


EN ISO 29462
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2022
EUROPÄISCHE NORM
ICS 91.140.30 Supersedes EN ISO 29462:2013
English Version

Field testing of general ventilation filtration devices and
systems for in situ removal efficiency by particle size and
resistance to airflow (ISO 29462:2022)
Essais in situ de filtres et systèmes de ventilation Betriebserprobung von Filtereinrichtungen und -
générale pour la mesure de l'efficacité en fonction de la systemen für die allgemeine Lüftung hinsichtlich ihrer
taille des particules et de la résistance à l'écoulement Abscheideeffizienz im eingebauten Zustand bezogen
de l'air (ISO 29462:2022) auf die Partikelgröße und den Druckverlust (ISO
29462:2022)
This European Standard was approved by CEN on 22 July 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 29462:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 29462:2022
EN ISO 29462:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 29462:2022
EN ISO 29462:2022 (E)
European foreword
This document (EN ISO 29462:2022) has been prepared by Technical Committee ISO/TC 142 "Cleaning
equipment for air and other gases" in collaboration with Technical Committee CEN/TC 195 “Cleaning
equipment for air and other gases” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2023, and conflicting national standards
shall be withdrawn at the latest by February 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 29462:2013.
Any feedback and questions on this document should be directed to the users’ national standards
body/national commit
...

SLOVENSKI STANDARD
oSIST prEN ISO 29462:2020
01-junij-2020
Terensko preskušanje splošnih prezračevalnih filtrirnih naprav in sistemov na
kraju samem (kraju vgradnje) glede učinkovitosti odstranjevanja delcev po njihovi
velikosti in glede upornosti proti zračnemu toku (ISO/DIS 29462:2020)
Field testing of general ventilation filtration devices and systems for in situ removal
efficiency by particle size and resistance to airflow (ISO/DIS 29462:2020)
Betriebserprobung von Filtereinrichtungen und -systemen für die allgemeine Lüftung
hinsichtlich ihrer Abscheideeffizienz im eingebauten Zustand bezogen auf die
Partikelgröße und den Druckverlust (ISO/DIS 29462:2020)
Essais in situ de filtres et systèmes de ventilation générale pour la mesure de l'efficacité
en fonction de la taille des particules et de la perte de charge (ISO/DIS 29462:2020)
Ta slovenski standard je istoveten z: prEN ISO 29462
ICS:
13.040.20 Kakovost okoljskega zraka Ambient atmospheres
23.120 Zračniki. Vetrniki. Klimatske Ventilators. Fans. Air-
naprave conditioners
91.140.30 Prezračevalni in klimatski Ventilation and air-
sistemi conditioning systems
oSIST prEN ISO 29462:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 29462:2020

---------------------- Page: 2 ----------------------
oSIST prEN ISO 29462:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 29462
ISO/TC 142 Secretariat: UNI
Voting begins on: Voting terminates on:
2020-04-14 2020-07-07
Field testing of general ventilation filtration devices and
systems for in situ removal efficiency by particle size and
resistance to airflow
Essais in situ de filtres et systèmes de ventilation générale pour la mesure de l'efficacité en fonction de la
taille des particules et de la perte de charge
ICS: 91.140.30
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 29462:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020

---------------------- Page: 3 ----------------------
oSIST prEN ISO 29462:2020
ISO/DIS 29462:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 29462:2020
ISO/DIS 29462:2020(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions, and abbreviations . 1
3.1 Terms and definitions . 1
3.2 Abbreviations .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.