SIST EN 60061-1:1999/A63:2022

SLOVENSKI STANDARD
SIST EN 60061-1:1999/A63:2022
01-oktober-2022
Vznožki in okovi sijalk skupaj s kalibri za nadzorovanje izmenljivosti in varnosti -
1. del: Vznožki sijalk - Dopolnilo A63
Lamp caps and holders together with gauges for the control of interchangeability and
safety - Part 1: Lamp caps
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und
Sicherheit - Teil 1: Lampensockel
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et
de la sécurité - Partie 1: Culots de lampes
Ta slovenski standard je istoveten z: EN 60061-1:1993/A63:2022
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
SIST EN 60061-1:1999/A63:2022 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 60061-1:1999/A63:2022

---------------------- Page: 2 ----------------------
SIST EN 60061-1:1999/A63:2022


EUROPEAN STANDARD EN 60061-1:1993/A63

NORME EUROPÉENNE

EUROPÄISCHE NORM July 2022
ICS 29.140.10

English Version
Lamp caps and holders together with gauges for the control of
interchangeability and safety - Part 1: Lamp caps
(IEC 60061-1:1969/AMD63:2022)
Culots de lampes et douilles ainsi que calibres pour le Lampensockel und -fassungen sowie Lehren zur Kontrolle
contrôle de l'interchangeabilité et de la sécurité - Partie 1: der Austauschbarkeit und Sicherheit - Teil 1: Lampensockel
Culots de lampes (IEC 60061-1:1969/AMD63:2022)
(IEC 60061-1:1969/AMD63:2022)
This amendment A63 modifies the European Standard EN 60061-1:1993; it was approved by CENELEC on 2022-07-01. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60061-1:1993/A63:2022 E

---------------------- Page: 3 ----------------------
SIST EN 60061-1:1999/A63:2022
EN 60061-1:1993/A63:2022 (E)
European foreword
The text of document 34B/2136/FDIS, future IEC 60061-1/AMD63, prepared by SC 34B "Lamp caps
and holders" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 60061-1:1993/A63:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-04-01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-07-01
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60061-1:1969/AMD63:2022 was approved by CENELEC as
a European Standard without any modification.


2

---------------------- Page: 4 ----------------------
SIST EN 60061-1:1999/A63:2022



IEC 60061-1

®


Edition 3.0 2022-05




INTERNATIONAL



STANDARD




NORME


INTERNATIONALE




A MENDMENT 63

T he sheets contained in this amendment are to be inserted in IEC 60061-1 (1969)


AMENDEMENT 63

Les feuilles de cet amendement sont à insérer dans l'IEC 60061-1 (1969)




Lamp caps and holders together with gauges for the control of


interchangeability and safety –

Part 1: Lamp caps



Culots de lampes et douilles ainsi que calibres pour le contrôle de

l'interchangeabilité et de la sécurité –

Partie 1: Culots de lampes











INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 29.140.10 ISBN 978-2-8322-0048-3




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 ----------------------
SIST EN 60061-1:1999/A63:2022
IEC 60061-1:1969/AMD63:2022  IEC 2022


CONTENTS SOMMAIRE

CONTENTS BY DESIGNATION SOMMAIRE PAR DÉSIGNATION
Sheet Feuille
Bi-pin caps G1.27, GX1.27 & GY1.3 . 7004-2-2 Culots à deux broches G1.27, GX1.27 & GY1.3 . 7004-2-2
Bi-pin caps G2.54, GX2.54 & GY2.5 . 7004-3-2 Culots à deux broches G2.54, GX2.54 & GY2.5 . 7004-3-2
Caps PX26d, PY26d-1 … PY26d-7 . 7004-5-7 Culots PX26d, PY26d-1 … PY26d-7 . 7004-5-7
Screw caps E11 . 7004-6-1 Culots à vis E11 . 7004-6-1
Screw caps EY10 . 7004-7-1 Culots à vis EY10 . 7004-7-1
Bayonet caps BAX9s . 7004-8-1 Culots à baïonnette BAX9s . 7004-8-1
Bayonet caps BAY9s . 7004-9-1 Culots à baïonnette BAY9s . 7004-9-1
Caps B22d . 7004-10-7 Culots B22d . 7004-10-7
Bayonet cap B22d-3(90°/135°)/25x26 . 7004-10A-2 Culot à baïonnette B22d-3(90°/135°)/25x26 . 7004-10A-2
Caps B15d . 7004-11-6 Culots B15d . 7004-11-6
Bayonet caps BA15 . 7004-11A-10 Culots à baïonnette BA15d & BA15s . 7004-11A-10
Bayonet caps BAY15d. 7004-11B-8 Culots à baïonnette BAY15d & BAY15s . 7004-11B-8
Caps BAZ15 . 7004-11C-3 Culots BAZ15d & BAZ15s . 7004-11C-3
Bayonet caps BA15s-3. 7004-11D-2 Culots à baïonnette BA15s-3(110°/130°) . 7004-11D-2
Caps BAW15 . 7004-11E-1 Culots BAW15d & BAW15s . 7004-11E-1
Bayonet caps BA20 . 7004-12-7 Culots à baïonnette BA20 . 7004-12-7
Bayonet automobile caps Culots à baïonnette pour automobiles
BA21-3(120°) . 7004-13-4 BA21-3(120°) . 7004-13-4
Bayonet caps BA9s . 7004-14-10 Culot à baïonnette BA9s . 7004-14-10
Bayonet cap BA7 . 7004-15-2 Culot à baïonnette BA7. 7004-15-2
Bayonet cap BY22d . 7004-17-3 Culot à baïonnette BY22d . 7004-17-3
Bayonet caps BAX15d. 7004-18-2 Culots à baïonnette BAX15d . 7004-18-2
Caps BAU15d & BAU15s . 7004-19-2 Culots BAU15d & BAU15s. 7004-19-2
Caps BA15d-3(110°), BA15s-3(110°), Culots BA15d-3(110°), BA15s-3(110°),
BAU15d-3(110°), BAU15s-3(110°), BAU15d-3(110°), BAU15s-3(110°),
BAW15d-3(110°), BAW15s-3(110°), BAW15d-3(110°), BAW15s-3(110°),
BAY15d-3(110°), BAY15s-3(110°), BAY15d-3(110°), BAY15s-3(110°),
BAZ15d-3(110°) & BAZ15s-3(110°) . 7004-19A-1 BAZd15-3(110°) & BAZs15-3(110°) . 7004-19A-1
Termination on finished lamps G16d . 7004-20-2 Connecteur des lampes terminées G16d . 7004-20-2
Screw caps E27 . 7004-21-10 Culots à vis E27 . 7004-21-10
Screw caps E26 . 7004-21A-4 Culots à vis E26 . 7004-21A-4
Screw caps E10 . 7004-22-6 . 7004-22-6
Culots à vis E10 .
Screw caps E14 . 7004-23-7 Culots à vis E14 . 7004-23-7
Screw caps E40 . 7004-24-7 Culots à vis E40 . 7004-24-7
Screw caps E39 . 7004-24A-3 Culots à vis E39 . 7004-24A-3
Screw cap E5 . 7004-25-3 Culot à vis E5 . 7004-25-3
Screw cap E17 . 7004-26-4 Culot à vis E17 . 7004-26-4
Screw cap E27/51x39 . 7004-27-3 Culot à vis E27/51x39 . 7004-27-3
Screw cap E12 . 7004-28-2 Culot à vis E12 . 7004-28-2
Double contact screw cap E26d . 7004-29-2 Culot à vis à double contact E26d . 7004-29-2
Prefocus screw caps EP10 . 7004-30-2 Culots à vis préfocus EP10 . 7004-30-2
Prefocus caps P20d, PX20d, PY20d & PZ20d . 7004-31-2 Culots préfocus P20d, PX20d, PY20d & PZ20d . 7004-31-2
Prefocus caps P22d & PX22d . 7004-32-2 Culots préfocus P22d & PX22d . 7004-32-2
Caps 2G13 . 7004-33-4 Culots 2G13 . 7004-33-4
Prefocus caps - Assembly of ring and cap Culots préfocus - Assemblage de la collerette
on finished lamps PX43t . 7004-34-2 et du culot sur lampes terminées PX43t . 7004-34-2
Prefocus cap PX13.5s . 7004-35-2 Culot préfocus PX13.5s . 7004-35-2
Prefocus cap P26s on finished lamp . 7004-36-1 Culot préfocus P26s sur la lampe terminée . 7004-36-1
Prefocus caps - Assembly of ring and Culots préfocus - Assemblage de la collerette
cap on finished lamps PKX22s . 7004-37-2 et du culot sur lampes terminées PKX22s . 7004-37-2

---------------------- Page: 6 ----------------------
SIST EN 60061-1:1999/A63:2022
IEC 60061-1:1969/AMD63:2022  IEC 2022


Sheet Feuille
Prefocus caps P43t . 7004-39-6 Culots préfocus P43t . 7004-39-6
Prefocus cap P13.5s . 7004-40-2 Culot préfocus P13.5s . 7004-40-2
Prefocus caps P28s . 7004-42-7 Culots préfocus P28s . 7004-42-7
Prefocus caps P40s . 7004-43-5 Culots préfocus P40s . 7004-43-5
Prefocus cap P30s-10.3. Assembly on finished Culot préfocus P30s-10.3. Assemblage sur lampes
lamps . 7004-44-3 terminées . 7004-44-3
Projector lamp caps on finished lamps G17q-7, Culots de lampes de projection sur lampes
GX17q-7 & GY17q-7 . 7004-45-3 terminées G17q-7, GX17q-7 & GY17q-7 . 7004-45-3
Prefocus caps - Assembly of ring and cap on Culots préfocus - Assemblage de la collerette et du
finished lamp P14.5s . 7004-46-2 culot sur la lampe terminée P14.5s . 7004-46-2
Prefocus cap PK22s . 7004-47-4 Culot préfocus PK22s . 7004-47-4
Prefocus cap PG22-6.35. Assembly of collar and Culot préfocus PG22-6.35. Assemblage de la
cap on finished lamp . 7004-48-1 collerette et du culot sur la lampe terminée . 7004-48-1
Bi-pin caps G13 . 7004-51-10 Culots à deux broches G13 . 7004-51-10
Bi-pin caps G5 . 7004-52-7 Culots à deux broches G5 . 7004-52-7
Bi-pin caps GX5 . 7004-52A-1 Culots à deux broches GX5 . 7004-52A-1
Bi-pin cap G20. 7004-53-2 Culot à deux broches G20 . 7004-53-2
Cap G10q . 7004-54-4 Culot G10q . 7004-54-4
Single-pin cap Fa6 . 7004-55-3 Culot à broche Fa6 . 7004-55-3
Recessed double contact cap R17d on finished Culot à deux contacts en retrait R17d sur lampes
lamps . 7004-56-2 terminées . 7004-56-2
Single-pin caps Fa8. 7004-57-2 Culots à broche Fa8 . 7004-57-2
Single-pin cap and end of lamp for tubular Culot à broche et extrémité de la lampe pour
lamps Fa4 . 7004-58-1 lampes tubulaires Fa4 . 7004-58-1
Bi-pin bases with and without provision for use with Socles à deux broches prévus ou non pour l'emploi
heat sinks G6.35, GX6.35, & GY6.35 . 7004-59-6 de refroidissseurs G6.35, GX6.35 & GY6.35 . 7004-59-6
Bi-pin lamp base GZ6.35 . 7004-59A-3 Socle à deux broches GZ6.35 . 7004-59A-3
Caps for double-capped tubular lamps Culots pour lampes tubulaires à deux culots
S15s & S19s . 7004-60-2 S15s & S19s . 7004-60-2
Flanged cap SX6s . 7004-61-1 Culot à collet SX6s . 7004-61-1
Grooved cap S5.7s . 7004-62-1 Culot à rainure S5.7s. 7004-62-1
Caps on finished lamps G12 . 7004-63-2 Culots sur lampe terminée G12 . 7004-63-2
Caps on finished lamps PG12 & PGX12 . 7004-64-3 Culots sur lampe terminée PG12 & PGX12 . 7004-64-3
Four-pin cap and lamp base GX38q . 7004-65-1 Culot et socle de lampe à quatre broches GX38q . 7004-65-1
Prefocus caps P29t . 7004-66-1 Culots préfocus P29t . 7004-66-1
Bi-pin lamp base GZ4 . 7004-67-3 Socle de lampe à deux broches GZ4 . 7004-67-3
Cap GR8 . 7004-68-3 Culot GR8. 7004-68-3
Bi-pin cap G23. 7004-69-1 Culot à deux broches G23 . 7004-69-1
Bi-pin cap G9.5. 7004-70-2 Culot à deux broches G9.5 . 7004-70-2
Bi-pin cap GX9.5 . 7004-70A-1 Culot à deux broches GX9.5 . 7004-70A-1
Bi-pin caps Culots à deux broches
GY9.5, GZ9.5, GZX9.5, GZY9.5 & GZZ9.5 . 7004-70B-4 GY9.5, GZ9.5, GZX9.5, GZY9.5 & GZZ9.5 . 7004-70B-4
Bi-pin lamp base G4 . 7004-72-3 Socle de lampe à deux broches G4 . 7004-72-3
Bi-pin lamp base GY4 . 7004-72A-1 Socle de lampe à deux broches GY4 . 7004-72A-1
Bi-pin cap G5.3. 7004-73-2 Culot à deux broches G5.3 . 7004-73-2
Bi-pin base GX5.3 . 7004-73A-2 Socle à deux broches GX5.3 . 7004-73A-2
Bi-pin base GY5.3 . 7004-73B-2 Socle à deux broches GY5.3 . 7004-73B-2
Bi-pin cap GY16 . 7004-74-2 Culot à deux broches GY16 . 7004-74-2
Bi-pin cap and base G22 . 7004-75-5 Culot et socle à deux broches G22 . 7004-75-5
Bi-pin caps and lamp base G38 . 7004-76-1 Culots et socle de lampe à deux broches G38 . 7004-76-1
Cap GR10q . 7004-77-2 Culot GR10q . 7004-77-2
Caps G24, GX24 & GY24 . 7004-78-5 Culots G24, GX24 & GY24. 7004-78-5

---------------------- Page: 7 ----------------------
SIST EN 60061-1:1999/A63:2022
IEC 60061-1:1969/AMD63:2022  IEC 2022


Sheet Feuille
Caps P11.5d . 7004-79-1 Culots P11.5d . 7004-79-1
Festoon caps SV7 . 7004-80-7 Culots pour lampes plafonnier SV7 . 7004-80-7
Festoon caps SV8.5 . 7004-81-4 Culots pour lampes plafonnier SV8.5 . 7004-81-4
Festoon caps SVX8.5 . 7004-81A-1 Culots pour lampes plafonnier SVX8.5 . 7004-81A-1
Cap 2G11 . 7004-82-2 Culots 2G11 . 7004-82-2
Cap 2GX11 . 7004-82A-2 Culots 2GX11 . 7004-82A-2
Caps for tubular infra-red Culots pour lampes tubulaires à radiation
lamps SK15s . 7004-83-1 infrarouge SK15s . 7004-83-1
Caps on finished lamps GX10q . 7004-84-2 Culots sur lampes terminées GX10q . 7004-84-2
Caps on finished lamps GY10q . 7004-85-2 Culots sur lampes terminées GY10q . 7004-85-2
Bi-pin cap GX23 . 7004-86-1 Culot à deux broches GX23 . 7004-86-1
Caps on finished lamps G32, GX32 & GY32 . 7004-87-2 Culots sur lampes terminées G32, GX32 & GY32 . 7004-87-2
Prefocus caps - Assembly of ring and cap Culots préfocus - Assemblage de la collerette
on finished lamps PY43d . 7004-88-2 et du culot sur lampes terminées PY43d . 7004-88-2
Prefocus cap - Assembly of ring and cap Culot préfocus - Assemblage de la collerette
on finished lamps PZ43t . 7004-89-2 et du culot sur lampes terminées PZ43t . 7004-89-2
Base of photo-flash lamp W10.6x8.5d . 7004-90-2 Socle de lampe flash W10.6x8.5d . 7004-90-2
Lamp base W2.1x9.5d . 7004-91-3 Socle de lampe W2.1x9.5d . 7004-91-3
Lamp base WX2.1x9.5d . 7004-91A-1 Socle de lampe WX2.1x9.5d . 7004-91A-1
Recessed single contact cap and end of Culot à un contact encastré et extrémité de la
lamp R7s . 7004-92-3 lampe R7s . 7004-92-3
Recessed single contact cap and end of Culot à un contact encastré et extrémité de la
lamp RX7s . 7004-92A-4 lampe RX7s . 7004-92A-4
Lamp base W2x4.6d . 7004-94-2 Socle de lampe W2x4.6d . 7004-94-2
Prefocus cap P45t . 7004-95-5 Culot préfocus P45t . 7004-95-5
Flanged caps SX4s/4 . 7004-97-2 Culots à collet SX4s/4 . 7004-97-2
Flanged caps SY4s/7 . 7004-97A-1 Culots à collet SY4s/7 . 7004-97A-1
Prefocus cap and end of lamp for Culot préfocus et extrémité de la lampe pour
automobile lamps X511 . 7004-99-2 lampes pour automobiles X511. 7004-99-2
Termination on finished lamps G16t . 7004-100-3 Connecteur des lampes terminées G16t . 7004-100-3
Caps GRX10q. . 7004-101-1 Culots GRX10q. . 7004-101-1
Cap 2G7 . 7004-102-2 Culot 2G7 . 7004-102-2
Cap 2GX7 . 7004-103-2 Culot 2GX7 . 7004-103-2
Wedge bases W2.5x16 . 7004-104-1 Socles W2.5x16 . 7004-104-1
Wedge bases WX2.5x16 . 7004-104A-1 Socles WX2.5x16 . 7004-104A-1
Wedge base WY2.5x16 . 7004-104B-1 Socle WY2.5x16 . 7004-104B-1
Wedge base WZ2.5x16 . 7004-104C-1 Socle WZ2.5x16 . 7004-104C-1
Wedge base WU2.5x16 . 7004-104D-1 Socle WU2.5x16 . 7004-104D-1
Lamp bases W3x16d & WX3x16d . 7004-105-3 Socles W3x16d & WX3x16d . 7004-105-3
Lamp bases W3x16q, WX3x16q & WY3x16q . 7004-106-4 Socles W3x16q, WX3x16q & WY3x16q . 7004-106-4
Caps PG13 & PGJ13 . 7004-107-4 Culots PG13 & PGJ13 . 7004-107-4
Bi-pin lamp bases GU4 . 7004-108-2 Socles de lampe à deux broches GU4 . 7004-108-2
Bi-pin bases GU5.3 . 7004-109-2 Socles à deux broches GU5.3 . 7004-109-2
Caps PGJ19 . 7004-110-3 Culots PGJ19 . 7004-110-3
Prefocus Caps PGJX19 . 7004-110A-1 Culots Préfocus PGJX19 . 7004-110A-1
Prefocus caps P32d & PK32d . 7004-111-5 Culots prefocus P32d & PK32d . 7004-111-5
Caps S14 . 7004-112-1 Culots S14 . 7004-112-1
Bi-pin lamp base GU7 . 7004-113-1 Socle de lampe à deux broches GU7 . 7004-113-1
Cap and end of lamp Fc2 . 7004-114-1 Culot et extrémité de la lampe Fc2 . 7004-114-1
Cap W4.3x8.5d . 7004-115-1 Culot W4.3x8.5d. 7004-115-1
Screw cap EZ10 . 7004-116-1 Culot à vis EZ10 . 7004-116-1
Cap 2G10 . 7004-118-2 Culot 2G10 . 7004-118-2
Bi-pin cap GY22 . 7004-119-1 Culot à deux broches GY22 . 7004-119-1
Bi-pin lamp base GZ10 . 7004-120-1 Socle de lampe à deux broches GZ10 . 7004-120-1
Bi-pin lamp base GU10 . 7004-121-2 Socle de lampe à deux broches GU10 . 7004-121-2

---------------------- Page: 8 ----------------------
SIST EN 60061-1:1999/A63:2022
IEC 60061-1:1969/AMD63:2022  IEC 2022


Sheet Feuille
Base G8.5 . 7004-122-3 Socle G8.5 . 7004-122-3
Cap GU10q . 7004-123-1 Culot GU10q . 7004-123-1
Cap GZ10q . 7004-124-1 Culot GZ10q . 7004-124-1
Cap 2GX13 . 7004-125-1 Culot 2GX13 . 7004-125-1
Base G5.3-4.8 . 7004-126-1 Socle G5.3-4.8 .
...