Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017)

This document specifies a method for the determination of constituent materials of a test sample
cut from a glass-reinforced plastics (GRP) component intended for use in a piping system. It includes
determination of resin, glass, aggregate and filler contents.
It is also applicable to the determination of the type and arrangement of the reinforcements. If used
to determine the amounts of constituent materials in layered constructions it may be necessary to
separate the laminate layers by cutting or splitting and testing each separately.

Kunststoff-Rohrleitungssysteme - Teile aus glasfaserverstärkten Kunststoffen (GFK) - Ermittlung der Gehalte von Bestandteilen (ISO 7510:2017)

Systèmes de canalisations en matières plastiques - Composants plastiques renforcés de verre (PRV) - Détermination des teneurs des constituants (ISO 7510:2017)

Cevni sistemi iz polimernih materialov - Sestavni deli iz polimernih materialov, ojačenih s steklenimi vlakni (GRP) - Določanje količine sestavin (ISO 7510:2017)

Ta dokument določa metodo za določanje količin sestavin preskusnega vzorca, izrezanega iz s steklom ojačenega polimernega materiala (GRP), predvidenega za uporabo v cevnem sistemu. Vključuje določanje vsebnosti smole, stekla, agregata in polnila.
Prav tako se uporablja za določanje vrste in ureditve ojačitev. Če se uporablja za določanje količin sestavin v plastnih strukturah, je morda treba ločiti laminatne sloje z rezanjem ali razdelitvijo in preskušanjem vsakega sloja posebej.

General Information

Status
Published
Public Enquiry End Date
26-Dec-2023
Publication Date
10-Mar-2024
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
06-Mar-2024
Due Date
11-May-2024
Completion Date
11-Mar-2024

Relations

Buy Standard

Standard
EN ISO 7510:2024
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7510:2024
01-april-2024
Nadomešča:
SIST EN 637:1997
Cevni sistemi iz polimernih materialov - Sestavni deli iz polimernih materialov,
ojačenih s steklenimi vlakni (GRP) - Določanje količine sestavin (ISO 7510:2017)
Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of
the amounts of constituents (ISO 7510:2017)
Kunststoff-Rohrleitungssysteme - Teile aus glasfaserverstärkten Kunststoffen (GFK) -
Ermittlung der Gehalte von Bestandteilen (ISO 7510:2017)
Systèmes de canalisations en matières plastiques - Composants plastiques renforcés de
verre (PRV) - Détermination des teneurs des constituants (ISO 7510:2017)
Ta slovenski standard je istoveten z: EN ISO 7510:2024
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
83.120 Ojačani polimeri Reinforced plastics
SIST EN ISO 7510:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 7510:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 7510:2024


EN ISO 7510
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2024
EUROPÄISCHE NORM
ICS 23.040.45; 23.040.20 Supersedes EN 637:1994
English Version

Plastics piping systems - Glass-reinforced plastics (GRP)
components - Determination of the amounts of
constituents (ISO 7510:2017)
Systèmes de canalisations en matières plastiques - Kunststoff-Rohrleitungssysteme - Teile aus
Composants plastiques renforcés de verre (PRV) - glasfaserverstärkten Kunststoffen (GFK) - Ermittlung
Détermination des teneurs des constituants (ISO der Gehalte von Bestandteilen (ISO 7510:2017)
7510:2017)
This European Standard was approved by CEN on 29 January 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7510:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 7510:2024
EN ISO 7510:2024 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 7510:2024
EN ISO 7510:2024 (E)
European foreword
The text of ISO 7510:2017 has been prepared by Technical Committee ISO/TC 138 "Reinforced plastics
pipes and fittings for all applications” of the International Organization for Standardization (ISO) and
has been taken over as EN ISO 7510:2024 by Technical Committee CEN/TC 155 “Plastics piping systems
and ducting systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2024, and conflicting national standards shall
be withdrawn at the latest by August 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 637:1994.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithua
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.