EN IEC 61316:2021
(Main)Industrial cable reels
Industrial cable reels
IEC 61316:2021 is available as IEC 61316:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61316:2021 applies to cable reels provided with a non-detachable flexible cable with a rated operating voltage not exceeding 690 V DC and/or 690 V AC with a frequency not exceeding 500 Hz and a rated current not exceeding 63 A, primarily intended for industrial use, either indoors or outdoors, for use with accessories complying with IEC 60309-1, IEC 60309-2 or IEC 60309-4. This third edition cancels and replaces the second edition, published in 1999. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Implementation of the latest tests and requirements previously included in IEC 60309-1.
Leitungsroller für industrielle Anwendung
Enrouleurs de câble industriels
IEC 61316:2021 est disponible sous forme de IEC 61316:2021 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 61316:2021 s’applique aux enrouleurs de câble munis d’un câble souple non détachable ayant une tension nominale d’emploi ne dépassant pas 690 V en courant continu et/ou 690 V en courant alternatif, avec une fréquence maximale de 500 Hz et un courant nominal ne dépassant pas 63 A, essentiellement destinés aux usages industriels, à l’intérieur ou à l’extérieur des bâtiments, et devant être utilisés avec des appareils conformes à l’IEC 60309-1, l’IEC 60309-2 ou l’IEC 60309-4. Cette troisième édition annule et remplace la deuxième édition parue en 1999. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: - Mise en œuvre des derniers essais et exigences précédemment inclus dans l’IEC 60309-1.
Industrijski kabelski koluti (IEC 61316:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61316:2021
01-december-2021
Nadomešča:
SIST EN 61316:2000
Industrijski kabelski koluti (IEC 61316:2021)
Industrial cable reels (IEC 61316:2021)
Leitungsroller für industrielle Anwendung (IEC 61316:2021)
Enrouleurs de câble industriels (IEC 61316:2021)
Ta slovenski standard je istoveten z: EN IEC 61316:2021
ICS:
29.120.99 Druga električna dodatna Other electrical accessories
oprema
SIST EN IEC 61316:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61316:2021
---------------------- Page: 2 ----------------------
SIST EN IEC 61316:2021
EUROPEAN STANDARD EN IEC 61316
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2021
ICS 29.060.01; 29.120.99 Supersedes EN 61316:1999 and all of its amendments
and corrigenda (if any)
English Version
Industrial cable reels
(IEC 61316:2021)
Enrouleurs de câble industriels Leitungsroller für industrielle Anwendung
(IEC 61316:2021) (IEC 61316:2021)
This European Standard was approved by CENELEC on 2021-08-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61316:2021 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61316:2021
EN IEC 61316:2021 (E)
European foreword
The text of document 23H/483/FDIS, future edition 3 of IEC 61316, prepared by SC 23H "Plugs,
Socket-outlets and Couplers for industrial and similar applications, and for Electric Vehicles" of
IEC/TC 23 "Electrical accessories" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 61316:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-05-12
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-08-12
document have to be withdrawn
This document supersedes EN 61316:1999 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61316:2021 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60352-7 NOTE Harmonized as EN IEC 60352-7
IEC 60998-2-2 NOTE Harmonized as EN 60998-2-2
2
---------------------- Page: 4 ----------------------
SIST EN IEC 61316:2021
EN IEC 61316:2021 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.