iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 230-2:1997/Cor 1:1999

(Corrigendum)

Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes — Technical Corrigendum 1

Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes — Technical Corrigendum 1

Code d'essai des machines-outils — Partie 2: Détermination de la précision et de la répétabilité de positionnement des axes en commande numérique — Rectificatif technique 1

General Information

Status
Withdrawn
Publication Date
14-Apr-1999
Withdrawal Date
14-Apr-1999
ICS
25.040.20 - Numerically controlled machines
Technical Committee
ISO/TC 39/SC 2 - Test conditions for metal cutting machine tools
Drafting Committee
ISO/TC 39/SC 2 - Test conditions for metal cutting machine tools
Current Stage
9599 - Withdrawal of International Standard
Completion Date
17-Mar-2006
Ref Project

Relations

Revised
ISO 230-2:2006 - Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
Effective Date
15-Apr-2008
Corrects
ISO 230-2:1997 - Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
Effective Date
06-Jun-2022
Child
ISO 230-2:1997 - Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
Effective Date
15-Apr-2008

Buy Standard

ISO 230-2:1997/Cor 1:1999ISO 230-2:1997/Cor 1:1999
PreviousNext
Standard
ISO 230-2:1997/Cor 1:1999
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 230-2:1997/Cor 1:1999ISO 230-2:1997/Cor 1:1999
PreviousNext
Standard
ISO 230-2:1997/Cor 1:1999
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL STANDARD ISO 230-2:1997
TECHNICAL CORRIGENDUM 1
A
Published 1999-04-15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • ÌÅÆÄÓÍÀÐÎÄÍÀß ÎÐÃÀÍÈÇÀÖÈß ÏÎ ÑÒÀÍÄÀÐÒÈÇÀÖÈÈ • ORGANISATION INTERNATIONALE DE NORMALISATION
Test code for machine tools —
Part 2:
Determination of accuracy and repeatability of positioning numerically
controlled axes
TECHNICAL CORRIGENDUM 1
Code d'essai des machines-outils —
Partie 2: Détermination de la précision et de la répétabilité de positionnement des axes en commande numérique
RECTIFICATIF TECHNIQUE 1
Technical Corrigendum 1 to International Standard ISO 230-2:1997 was prepared by Technical Committee
...

NORME INTERNATIONALE ISO 230-2:1997
RECTIFICATIF TECHNIQUE 1
A
Publié 1999-04-15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • ÌÅÆÄÓÍÀÐÎÄÍÀß ÎÐÃÀÍÈÇÀÖÈß ÏÎ ÑÒÀÍÄÀÐÒÈÇÀÖÈÈ • ORGANISATION INTERNATIONALE DE NORMALISATION
Code d'essai des machines-outils —
Partie 2:
Détermination de la précision et de la répétabilité de positionnement
des axes en commande numérique
RECTIFICATIF TECHNIQUE 1
Test code for machine tools —
Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
TECHNICAL CORRIGENDUM 1
Le Rectificatif technique 1 à la Norme internationale ISO 230-2:1997 a été élaboré par le comité technique
ISO/TC 39, Machines-outils,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 230-4:2022(Main)
Test code for machine tools — Part 4: Circular tests for numerically controlled machine tools

This document provides methods for the determination of the contouring performance of numerically controlled machine tools. This document specifies methods of testing and evaluating the bi-directional circular error, the mean bi-directional radial error, the circular error and the radial error of circular paths that are produced by the simultaneous movements of two linear axes. This document also specifies methods of testing the deviations of the circular or constant radius trajectories generated by any combination of simultaneously controlled (coordinated) linear and rotary axes. The basic principle of these tests is to coordinate the multiple axes of motion (combination of rotary and linear axes) to keep the relative position between the tool and the workpiece constant. This document describes differences between circular errors and radial errors (Annex A), influences of typical machine errors on circular paths executed with two linear axes (Annex B), precautions for test set-ups for circular tests with rotary axes (Annex C), an example of adjustment of diameter and contouring speed for circular tests (Annex D), and circular tests using feedback signal (Annex E).

  • Standard
    26 pages
    English language
    sale 15% off
  • Standard
    28 pages
    French language
    sale 15% off
ISO
ISO 17543-1:2020(Main)
Machine tools — Test conditions for universal spindle heads — Part 1: Accessory heads for machines with horizontal spindle (horizontal Z-axis)

This document specifies, with reference to the ISO 230 series, some families of tests for accessory spindle heads used on machining centres or numerically controlled milling machines, etc., where applicable, with horizontal spindle (i.e. horizontal Z-axis). The tests considered in this document are also applicable to manual indexing heads. This document establishes the tolerances or maximum acceptable values for the test results corresponding to general purpose and normal accuracy spindle heads used on different types of machines. This document specifies several sets of procedures for geometric tests which can be carried out on different types of spindle heads for comparison, acceptance, maintenance, adjustments or any other purpose. Grinding heads and facing heads are not included in the scope of this document. This document deals only with the verification of geometric and positioning accuracy of the accessory spindle heads and does not apply to: — the testing of the machine's head(s) operation (e.g. vibration, abnormal sound noise level, stick slip motion of components); — the machine's spindle head(s) characteristics (e.g. speeds, feeds and accelerations) which are generally checked separately; or — the verification of the machining capability under power. Tests concerning the accuracy of finished test pieces are dealt with in other ISO standards.

  • Standard
    44 pages
    English language
    sale 15% off
  • Standard
    45 pages
    French language
    sale 15% off
ISO
ISO 13041-1:2020(Main)
Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with horizontal workholding spindle(s)

This document specifies, with reference to ISO 230-1, the geometric tests on normal accuracy numerically controlled (NC) turning machines and turning centres with horizontal work spindles as defined in 3.1 and 3.2. It also specifies the applicable tolerances corresponding to the above-mentioned tests. Where applicable, this document also applies to horizontal spindle turret and single spindle automatic lathes. This document explains different concepts or configurations and common features of NC turning machines and turning centres. It also provides a terminology and designation of controlled axes. This document deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick slip motion of components) nor to machine characteristics (e.g. speeds, feeds) as such are checks generally carried out before testing the accuracy.

  • Standard
    47 pages
    English language
    sale 15% off
  • Standard
    49 pages
    French language
    sale 15% off
ISO
ISO 13041-2:2020(Main)
Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle

This document specifies, with reference to ISO 230‑1 and ISO 230‑7, the geometric tests for general-purpose normal accuracy numerically controlled (NC) turning machines and turning centres with vertical workholding spindles, as well as the corresponding applicable tolerances. This document explains different concepts or configurations and common features of NC turning machines and turning centres with vertical workholding spindles. It also provides a terminology and designation of controlled axes (see Figures 1, 2 and Table 1). This document deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick slip motion of components) nor to machine characteristics (e.g. speeds, feeds). Tests not concerning the geometric accuracy of the machine are dealt with in other parts of ISO 13041.

  • Standard
    36 pages
    English language
    sale 15% off
  • Standard
    37 pages
    French language
    sale 15% off
ISO
ISO 19744:2020(Main)
Test conditions for numerically controlled broaching machines — Testing of accuracy — Vertical surface type broaching machines

This document specifies, with reference to ISO 230-1, the geometric tests on numerically controlled (NC) broaching machines of normal accuracy, with vertical axis acting for cutting operation. The accuracy of rotary axes, if available, is checked with reference to ISO 230-7. This document also specifies, with reference to ISO 230-2, the positioning tests on vertical surface type broaching machines for both linear and rotary axes. This document proposes test pieces containing broached slots and grooves with reference to ISO 230-1, cutting tests under finishing conditions. It also specifies the characteristics and dimensions of the test pieces themselves. This document is intended to supply minimum requirements for assessing the cutting accuracy of the machine. This document also establishes the tolerances for the test results corresponding to general purpose and normal accuracy vertical surface type broaching machines equipped with numerical control. This document explains different concepts or configurations and common features of NC vertical surface type broaching machines which are normally used in the manufacturing of turbine disks. It also provides a terminology and designation of controlled axes with reference to ISO 841. This document deals only with the verification of the accuracy of the broaching machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components), nor to machine characteristics (e.g. speeds, feeds) as such checks are generally carried out before testing the accuracy.

  • Standard
    44 pages
    English language
    sale 15% off
  • Standard
    50 pages
    French language
    sale 15% off
  • Standard
    50 pages
    French language
    sale 15% off
ISO
ISO 230-2:2014/Amd 1:2016(Amendment)
Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes — Amendment 1
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 13041-5:2015(Main)
Test conditions for numerically controlled turning machines and turning centres — Part 5: Accuracy of speeds and interpolations

ISO 13041-5:2015 specifies, with references to ISO 230‑1 and ISO 230‑4, certain kinematic tests for numerically controlled (NC) turning machines and turning centres, concerning the spindle speeds, the feed speeds of the individual NC linear axes, and the accuracy of the paths described by the simultaneous movement of two or more NC linear and/or rotary axes. NOTE This part of ISO 13041 applies to numerically-controlled turning machines and turning centres with horizontal, vertical, and inverted vertical type workholding spindle(s).

  • Standard
    33 pages
    English language
    sale 15% off
  • Standard
    36 pages
    French language
    sale 15% off
ISO
ISO 230-2:2014(Main)
Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes

ISO 230-2:2014 specifies methods for testing and evaluating the accuracy and repeatability of positioning of numerically controlled machine tool axes by direct measurement of individual axes on the machine. These methods apply equally to linear and rotary axes. ISO 230-2:2014 can be used for type testing, acceptance tests, comparison testing, periodic verification, machine compensation, etc. The methods involve repeated measurements at each position. The related parameters of the test are defined and calculated. Their uncertainties are estimated as described in ISO/TR 230-9:2005, Annex C.

  • Standard
    50 pages
    English language
    sale 15% off
  • Standard
    43 pages
    English language
    sale 15% off
  • Standard
    43 pages
    English language
    sale 15% off
  • Standard
    45 pages
    French language
    sale 15% off
  • Standard
    45 pages
    French language
    sale 15% off
ISO
ISO 13041-6:2009(Main)
Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece

ISO 13041-6:2009 specifies, with reference to ISO 230-1, a series of cutting tests, under finishing conditions, of standard test pieces. It also specifies the characteristics and dimensions of the test pieces themselves. ISO 13041-6:2009 is intended to supply minimum requirements for assessing the cutting accuracy of the machine.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
ISO
ISO 13041-3:2009(Main)
Test conditions for numerically controlled turning machines and turning centres — Part 3: Geometric tests for machines with inverted vertical workholding spindles

ISO 13041-3:2009 specifies, with reference to ISO 230-1 and ISO 230-7, the geometric tests on general‑purpose, numerically controlled (NC) turning machines and turning centres with inverted vertical workholding spindles, as well as the corresponding applicable tolerances. It presents the different concepts or configurations and common features of NC turning machines and turning centres with inverted vertical spindles. It also provides a terminology and designation of controlled axes. ISO 13041-3:2009 deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components), nor to machine characteristics (e.g. speeds, feeds), as such checks are generally carried out before testing accuracy.

  • Standard
    35 pages
    English language
    sale 15% off
  • Standard
    35 pages
    English language
    sale 15% off
  • Standard
    35 pages
    French language
    sale 15% off
  • Standard
    35 pages
    French language
    sale 15% off