SIST EN ISO 20567-2:2023
(Main)Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2023)
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2023)
ISO 20567-2:2017 specifies a method for the evaluation of the resistance of automobile finishes and other coatings to the impact of a wedge-shaped body projected onto the surface under test to simulate the impact of stones.
Beschichtungsstoffe - Prüfung der Steinschlagfestigkeit von Beschichtungen - Teil 2: Einzelschlagprüfung mit geführtem Schlagkörper (ISO 20567-2:2023)
Dieses Dokument legt ein Verfahren zum Beurteilen der Beständigkeit von Kraftfahrzeugbeschichtungen und anderen Beschichtungen gegen den Einschlag eines keilförmigen Schlagkörpers als simulierte Stein-schlageinwirkung fest.
Peintures et vernis - Détermination de la résistance des revêtements aux impacts de cailloux - Partie 2: Essai de choc simple par corps percutant guidé (ISO 20567-2:2023)
ISO 20567-2:2017 spécifie une méthode d'évaluation de la résistance des revêtements, notamment ceux utilisés pour la finition des carrosseries de voitures, à la projection d'un corps en forme de coin contre la surface soumise à essai, cette projection étant destinée à simuler l'impact de cailloux.
Barve in laki - Ugotavljanje odpornosti premazov proti udarcem kamenja - 2. del: Preskus z enim udarcem vodenega telesa (ISO 20567-2:2023)
Standard ISO 20567-2:2017 določa metodo za vrednotenje odpornosti avtomobilskih premazov in drugih prevlek proti udarcem s klinastim predmetom, ki simulirajo udarce kamenja.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 20567-2:2023
01-september-2023
Nadomešča:
SIST EN ISO 20567-2:2017
Barve in laki - Ugotavljanje odpornosti premazov proti udarcem kamenja - 2. del:
Preskus z enim udarcem vodenega telesa (ISO 20567-2:2023)
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2:
Single-impact test with a guided impact body (ISO 20567-2:2023)
Beschichtungsstoffe - Prüfung der Steinschlagfestigkeit von Beschichtungen - Teil 2:
Einzelschlagprüfung mit geführtem Schlagkörper (ISO 20567-2:2023)
Peintures et vernis - Détermination de la résistance des revêtements aux impacts de
cailloux - Partie 2: Essai de choc simple par corps percutant guidé (ISO 20567-2:2023)
Ta slovenski standard je istoveten z: EN ISO 20567-2:2023
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 20567-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 20567-2:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 20567-2:2023
EN ISO 20567-2
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2023
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 20567-2:2017
English Version
Paints and varnishes - Determination of stone-chip
resistance of coatings - Part 2: Single-impact test with a
guided impact body (ISO 20567-2:2023)
Peintures et vernis - Détermination de la résistance des Beschichtungsstoffe - Prüfung der Steinschlagfestigkeit
revêtements aux impacts de cailloux - Partie 2: Essai de von Beschichtungen - Teil 2: Einzelschlagprüfung mit
choc simple par corps percutant guidé (ISO 20567- geführtem Schlagkörper (ISO 20567-2:2023)
2:2023)
This European Standard was approved by CEN on 5 May 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20567-2:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 20567-2:2023
EN ISO 20567-2:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 20567-2:2023
EN ISO 20567-2:2023 (E)
European foreword
This document (EN ISO 20567-2:2023) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2024, and conflicting national standards shall
be withdrawn at the latest by January 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 20567-2:2017.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Mac
...
SLOVENSKI STANDARD
oSIST prEN ISO 20567-2:2023
01-januar-2023
Barve in laki - Ugotavljanje odpornosti premazov proti udarcem kamenja - 2. del:
Preskus z enim udarcem vodenega telesa (ISO/DIS 20567-2:2022)
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2:
Single-impact test with a guided impact body (ISO/DIS 20567-2:2022)
Beschichtungsstoffe - Prüfung der Steinschlagfestigkeit von Beschichtungen - Teil 2:
Einzelschlagprüfung mit geführtem Schlagkörper (ISO/DIS 20567-2:2022)
Peintures et vernis - Détermination de la résistance des revêtements aux impacts de
cailloux - Partie 2: Essai de choc simple par corps percutant guidé (ISO/DIS 20567-
2:2022)
Ta slovenski standard je istoveten z: prEN ISO 20567-2 rev
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 20567-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 20567-2:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 20567-2:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 20567-2
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
2022-12-07 2023-03-01
Paints and varnishes — Determination of stone-chip
resistance of coatings —
Part 2:
Single-impact test with a guided impact body
Peintures et vernis — Détermination de la résistance des revêtements aux impacts de cailloux —
Partie 2: Essai de choc simple par corps percutant guidé
ICS: 87.040
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 20567-2:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 20567-2:2023
ISO/DIS 20567-2:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 20567-2
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
Paints and varnishes — Determination of stone-chip
resistance of coatings —
Part 2:
Single-impact test with a guided impact body
Peintures et vernis — Détermination de la résistance des revêtements aux impacts de cailloux —
Partie 2: Essai de choc simple par corps percutant guidé
ICS: 87.040
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 20567-2:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO 20567-2:2023
ISO/DIS 20567-2:2022(E)
Contents Page
Foreword .iv
Introduction .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.