iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 3838:2004/prA1

(Amendment)

Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods - Amendment 1 (ISO 3838:2004/DAM 1:2023)

Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods - Amendment 1 (ISO 3838:2004/DAM 1:2023)

Rohöl und flüssige oder feste Mineralölerzeugnisse - Bestimmung der Dichte oder der relativen Dichte - Verfahren mittels Pyknometer mit Kapillarstopfen und Bikapillar-Pyknometer mit Skale - Änderung 1 (ISO 3838:2004/DAM 1:2023)

Pétrole brut et produits pétroliers liquides ou solides - Détermination de la masse volumique ou de la densité - Méthodes du pycnomètre à bouchon capillaire et du pycnomètre bicapillaire gradué - Amendement 1 (ISO 3838:2004/DAM 1:2023)

Surova nafta in tekoči ali trdni naftni proizvodi - Določanje gostote ali relativne gostote - Metoda s piknometrom s kapilarnim zamaškom in metoda z graduiranim bikapilarnim piknometrom - Dopolnilo A1 (ISO 3838:2004/DAM 1:2023)

General Information

Status
Not Published
Publication Date
14-Jan-2025
ICS
75.040 - Crude petroleum
75.080 - Petroleum products in general
Technical Committee
CEN/TC 19 - Petroleum products, lubricants and related products
Current Stage
6055 - CEN Ratification completed (DOR) - Publishing
Start Date
15-Oct-2023
Completion Date
15-Oct-2023
Ref Project
SIST EN ISO 3838:2004/oprA1:2023 - Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods - Amendment 1 (ISO 3838:2004/DAM 1:2023)

Relations

Amends
EN ISO 3838:2004 - Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)
Effective Date
26-Apr-2023

Buy Standard

EN ISO 3838:2004/oprA1:2023EN ISO 3838:2004/oprA1:2023
PreviousNext
Draft
EN ISO 3838:2004/oprA1:2023
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3838:2004/oprA1:2023
01-september-2023
Surova nafta in tekoči ali trdni naftni proizvodi - Določanje gostote ali relativne
gostote - Metoda s piknometrom s kapilarnim zamaškom in metoda z graduiranim
bikapilarnim piknometrom - Dopolnilo A1 (ISO 3838:2004/DAM 1:2023)
Crude petroleum and liquid or solid petroleum products - Determination of density or
relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer
methods - Amendment 1 (ISO 3838:2004/DAM 1:2023)
Rohöl und flüssige oder feste Mineralölerzeugnisse - Bestimmung der Dichte oder der
relativen Dichte - Verfahren mittels Pyknometer mit Kapillarstopfen und Bikapillar-
Pyknometer mit Skale - Änderung 1 (ISO 3838:2004/DAM 1:2023)
Pétrole brut et produits pétroliers liquides ou solides - Détermination de la masse
volumique ou de la densité - Méthodes du pycnomètre à bouchon capillaire et du
pycnomètre bicapillaire gradué - Amendement 1 (ISO 3838:2004/DAM 1:2023)
Ta slovenski standard je istoveten z: EN ISO 3838:2004/prA1
ICS:
75.040 Surova nafta Crude petroleum
75.080 Naftni proizvodi na splošno Petroleum products in
general
SIST EN ISO 3838:2004/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 3838:2004/oprA1:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 3838:2004/oprA1:2023
DRAFT AMENDMENT
ISO 3838:2004/DAM 1
ISO/TC 28/SC 2 Secretariat: BSI
Voting begins on: Voting terminates on:
2023-06-22 2023-09-14
Crude petroleum and liquid or solid petroleum products —
Determination of density or relative density — Capillary-
stoppered pyknometer and graduated bicapillary
pyknometer methods
AMENDMENT 1
Pétrole brut et produits pétroliers liquides ou solides — Détermination de la masse volumique ou de la
densité — Méthodes du pycnomètre à bouchon capillaire et du pycnomètre bicapillaire gradué
AMENDEMENT 1
ICS: 75.080
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 3838:2004/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
SIST EN ISO 3838:2004/oprA1:2023
ISO 3838:2004/DAM 1:2023(E)
DRAFT AMENDMENT
ISO 3838:2004/DAM 1
ISO/TC 28/SC 2 Secretariat: BSI
Voting begins on: Voting terminates on:

Crude petroleum and liquid or solid petroleum products —
Determination of density or relative density — Capillary-
stoppered pyknometer and graduated bicapillary
pyknometer methods
AMENDMENT 1
Pétrole brut et produits pétroliers liquides ou solides — Détermination de la masse volumique ou de la
densité — Méthodes du pycnomètre à bouchon capillaire et du pycnomètre bicapillaire gradué
AMENDEMENT 1
ICS: 75.080
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO 3838:2004/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 3838:2004(Main)
Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)
SIST EN ISO 3838:2004

ISO 3838:2004 specifies methods for the determination of the density or relative density of crude petroleum and of petroleum products handled as liquids.
The capillary-stoppered pyknometer method is also for use with solids and this method may also be used for coal tar products, including road tars, creosote and tar pitches, or for mixtures of these with petroleum products. This method is not suitable for the determination of the density or relative density of highly volatile liquids having Reid vapour pressures greater than 50 kPa according to ISO 3007 or having an initial boiling point below 40 degrees Celsius.
The graduated bicapillary pyknometer method is recommended for the accurate determination of the density or relative density of all except the more viscous products, and is particularly useful when only small amounts of samples are available. The method is restricted to liquids having Reid vapour pressures of 130 kPa or less according to ISO 3007 and having kinematic viscosities less than 50 mm2/s (50 centistokes (cSt)) at the test temperature.
Special precautions are specified for the determination of the density or relative density of highly volatile liquids.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3838:2004(Main)
Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)
SIST EN ISO 3838:2004

ISO 3838:2004 specifies methods for the determination of the density or relative density of crude petroleum and of petroleum products handled as liquids.
The capillary-stoppered pyknometer method is also for use with solids and this method may also be used for coal tar products, including road tars, creosote and tar pitches, or for mixtures of these with petroleum products. This method is not suitable for the determination of the density or relative density of highly volatile liquids having Reid vapour pressures greater than 50 kPa according to ISO 3007 or having an initial boiling point below 40 degrees Celsius.
The graduated bicapillary pyknometer method is recommended for the accurate determination of the density or relative density of all except the more viscous products, and is particularly useful when only small amounts of samples are available. The method is restricted to liquids having Reid vapour pressures of 130 kPa or less according to ISO 3007 and having kinematic viscosities less than 50 mm2/s (50 centistokes (cSt)) at the test temperature.
Special precautions are specified for the determination of the density or relative density of highly volatile liquids.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15118-9:2023(Main)
Road vehicles - Vehicle to grid communication interface - Part 9: Physical and data link layer conformance test for wireless communication (ISO 15118-9:2022)
SIST EN ISO 15118-9:2023

This document specifies conformance tests in the form of an abstract test suite (ATS) for a system under test (SUT) implementing an electric-vehicle or supply-equipment communication controller (EVCC or SECC) with support for WLAN-based high-level communication (HLC) according to ISO 15118 8 and against the background of ISO 15118-1. These conformance tests specify the testing of capabilities and behaviours of an SUT, as well as checking what is observed against the conformance requirements specified in ISO 15118 8 and against what the implementer states the SUT implementation's capabilities are.
The capability tests within the ATS check that the observable capabilities of the SUT are in accordance with the static conformance requirements defined in ISO 15118 8. The behaviour tests of the ATS examine an implementation as thoroughly as practical over the full range of dynamic conformance requirements defined in ISO 15118 8 and within the capabilities of the SUT (see NOTE below).
A test architecture is described in correspondence to the ATS. The abstract test cases in this document are described leveraging this test architecture and are specified in descriptive tabular format for the ISO/OSI physical and data link layers (layers 1 and 2).
In terms of coverage, this document only covers normative sections and requirements in ISO 15118 8. This document can additionally refer to specific tests for requirements on referenced standards (e.g. IEEE, or industry consortia standards, like WiFi Alliance) as long as they are relevant in terms of conformance for implementations according to ISO 15118 8. However, it is explicitly not intended to widen the scope of this conformance specification to such external standards, if it is not technically necessary for the purpose of conformance testing for ISO 15118 8. Furthermore, the conformance tests specified in this document do not include the assessment of performance nor robustness or reliability of an implementation. They cannot provide judgments on the physical realization of abstract service primitives, how a system is implemented, how it provides any requested service, nor the environment of the protocol implementation. Furthermore, the abstract test cases defined in this document only consider the communication protocol and the system's behaviour defined ISO 15118 8. The power flow between the EVSE and the EV is not considered.

  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3660-005:2023(Main)
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief - Product standard
SIST EN 3660-005:2023

This document specifies a range of cable outlets, style A, 90°, unsealed with clamp strain relief for use under the following conditions:
Associated electrical connector(s): EN 3660 002
Temperature range,   Class N:   −65 °C to 200 °C
   Class W:   −65 °C to 175 °C
   Class K:   −65 °C to 260 °C
   Class A:   −65 °C to 260 °C
   Class T:   −65 °C to 175 °C (nickel PTFE plating)
   Class Z:   −65 °C to 175 °C (black zinc nickel plating)

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13232-4:2023(Main)
Railway applications - Track - Switches and crossings for Vignole rails - Part 4: Actuation, locking and detection
SIST EN 13232-4:2023

This document determines the interface between moveable parts and the actuation, locking and detection equipment, and defines the basic criteria for switches and crossing with moveable parts in respect of the interface.
It concerns:
—   rules, parameters and tolerances for alternative positions of the moveable parts;
—   criteria and limits for the forces which move and restrain the moveable parts.

  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1407:2023(Main)
Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides
kSIST FprEN 1407:2023

This document is applicable to anionic and non-ionic polyacrylamides used for treatment of water intended for human consumption. It describes the characteristics of anionic and non-ionic polyacrylamides and specifies the requirements and the corresponding test methods for anionic and non-ionic polyacrylamides. It gives information on their use in water treatment.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13232-6:2023(Main)
Railway applications - Track - Switches and crossings for Vignole rails - Part 6: Fixed common and obtuse crossings
SIST EN 13232-6:2023

This document:
—   Establish a working terminology for fixed crossings and their constituent parts, and identifies the main types;
—   specifies the different and varying ways by which crossings can be described using the following parameters:
—   geometry of the crossing;
—   types of construction;
—   design criteria;
—   manufacturing processes;
—   tolerances and inspection.

  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12736-3:2023(Main)
Oil and gas industries including lower carbon energy - Wet thermal insulation systems for pipelines and subsea equipment - Part 3: Interfaces between systems, field joint system, field repairs and prefabricated insulation (ISO 12736-3:2023)
SIST EN ISO 12736-3:2023
  • Draft
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17636:2023(Main)
Railway applications - Infrastructure - Track alignment design parameters - Urban rail
SIST EN 17636:2023

This document specifies rules and limits for track alignment design parameters, including alignments within switches and crossings. Several of these limits are functions of speed. Alternatively, for a given track alignment, it specifies rules and limits that determine permissible speed with regards to track alignment.
This document applies to urban or suburban rail networks for passenger services not integrated with the national network.
Sections of urban or suburban rail networks integrated in the national rail networks are not covered by this document. They are covered by EN 13803 (or for nominal track gauges smaller than 1 435 mm by national alignment rules).
For the purpose of this document, urban or suburban rail networks include:
-   Networks designed for own right of way and segregated from general road and pedestrian traffic,
and
-   Networks (partly) not segregated from general road and pedestrian traffic, with shared lanes.
This document applies to rail systems with steel wheels running on steel vignole or grooved rails. Rail systems with specific construction issues (e.g. rack railways, funicular railways and other types of cable drawn rail systems) are not covered by this document.
This document defines the parameters, rules and limits for nominal track gauges of 1 435 mm and 1 000 mm with permissible speeds up to 120 km/h. For other nominal track gauges, this document defines conversion rules which shall be used to define the limits.

  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13232-8:2023(Main)
Railway applications - Track - Switches and crossings for Vignole rails - Part 8: Expansion devices
SIST EN 13232-8:2023

This part of EN 13232 covers the following subjects: to establish a working terminology for expansion devices, for their constituent parts and for the types; to specify the minimum manufacturing requirements for expansion devices and their constituent parts; to formulate codes of practice for inspection and tolerances; to define the method by which expansion devices and their parts should be identified and traced.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day