Railway applications - Platform barrier systems

This European Standard specifies requirements for the design, construction and operation of platform barrier systems positioned at the edge of a station platform immediately adjacent to rail or other guided vehicles in stations and boarding points for passenger services and includes:
- requirements for the fixed structure and fixed parts along the platform;
- physical requirements for the movable doors and gates normally used by passengers;
- requirements for emergency doors;
- requirements for driver access doors;
- requirements for platform extremity doors;
- requirements for management of safety risks that are particular to barrier systems.
This European Standard also gives requirements for the integration of barriers with the overall rail system including:
- synchronization of vehicle and platform barrier doors or gates;
- audible and visible alerts;
- integrity of control systems;
- testing of the barrier installation;
- operational performance;
- requirements relating to other interfacing sub-systems, notably signalling and vehicles.
For barrier systems set back from the platform edge, which are used to control access to trains or for crowd management, relevant sections of the document can be used as guidance.
This European Standard applies to all actors involved in the implementation and system integration of a platform barrier system, including infrastructure owners, designers, installers and operators.
This European Standard does not cover barrier systems using bars, ropes, etc. or which operate in a vertical direction.  
This European Standard applies to light rail services, e.g. metro and tramway systems and heavy rail services as requested by a project specification. It applies to small systems, working in conjunction with a single vehicle, or with larger systems working with a complete train.
This European Standard applies to platform barrier systems used at sub-surface stations, enclosed surface stations (e.g. those enclosed for the purposes of providing an air-conditioned environment for waiting passengers), and those fully in the open-air.
This European Standard does not cover normative requirements relating to fire performance or fire requirements arising from use of platform barrier systems as fire barriers.

Bahnanwendungen - Bahnsteig-Barrieresysteme

Applications ferroviaires - Systèmes façades de quai

Železniške naprave - Ploščad pregradnih sistemov

General Information

Status
Not Published
Public Enquiry End Date
29-Feb-2020
Technical Committee
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
11-Mar-2021
Due Date
29-Apr-2021
Completion Date
12-Mar-2021

Buy Standard

Draft
oSIST prEN 17168:2020
English language
54 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN 17168:2020
01-februar-2020
Železniške naprave - Ploščad pregradnih sistemov
Railway applications - Platform barrier systems
Bahnanwendungen - Bahnsteig-Barrieresysteme
Applications ferroviaires - Systèmes façades de quai
Ta slovenski standard je istoveten z: prEN 17168
ICS:
45.020 Železniška tehnika na Railway engineering in
splošno general
93.100 Gradnja železnic Construction of railways
oSIST prEN 17168:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17168:2020
---------------------- Page: 2 ----------------------
oSIST prEN 17168:2020
DRAFT
EUROPEAN STANDARD
prEN 17168
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2019
ICS 45.020; 45.120
English Version
Railway applications - Platform barrier systems

Applications ferroviaires - Systèmes façades de quai Bahnanwendungen - Bahnsteig-Barrieresysteme

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 256.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17168:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17168:2020
prEN 17168:2019 (E)
Contents Page

European foreword ............................................................................................................................................ 4

Introduction .......................................................................................................................................................... 5

1 Scope .......................................................................................................................................................... 6

2 Normative references .......................................................................................................................... 7

3 Terms and definitions ......................................................................................................................... 9

4 System design requirements .......................................................................................................... 12

4.1 Physical and structural requirements of the platform barrier .......................................... 12

4.1.1 General structural requirements .................................................................................................. 12

4.1.2 Structural design principles ........................................................................................................... 13

4.1.3 Structural loading conditions ......................................................................................................... 13

4.1.4 Glazing and other panelling materials in facades, including doors and gates .............. 15

4.1.5 Fire performance – use as a fire barrier ..................................................................................... 16

4.1.6 Fire performance - fire resistance of materials ....................................................................... 16

4.1.7 Requirements for emergency doors/gates ................................................................................ 16

4.1.8 Requirements for driver access doors/gates ........................................................................... 17

4.1.9 Requirements for platform extremity doors/gates ............................................................... 17

4.1.10 Entrapment between the platform barrier and vehicles ..................................................... 19

4.1.11 Environmental requirements ......................................................................................................... 23

4.1.12 Acoustic and thermal properties of platform barriers ......................................................... 24

4.1.13 Physical requirements of doors and gates for normal operation ..................................... 24

4.2 Control and electrical requirements ........................................................................................... 26

4.2.1 Control system – conditions for opening/closing of doors/gates ..................................... 26

4.2.2 Detection of door/gate locking and closure .............................................................................. 27

4.2.3 Door/gate status indications .......................................................................................................... 27

4.2.4 Synchronization of vehicle and platform doors/gates .......................................................... 27

4.2.5 Audible and visible alerts ................................................................................................................ 28

4.2.6 Integrity of control systems ............................................................................................................ 28

4.2.7 Local control of the doors/gates in a platform barrier system .......................................... 28

4.2.8 Electrical safety – earthing and bonding arrangements ....................................................... 29

5 Operational requirements ............................................................................................................... 32

5.1 General operational requirements .............................................................................................. 32

5.1.1 Maintainability .................................................................................................................................... 32

5.1.2 Persons with reduced mobility ...................................................................................................... 32

5.1.3 Gauging ................................................................................................................................................... 32

5.1.4 Tripping hazard at vehicle and platform barrier doorways ............................................... 33

5.2 Requirements for mechanical gap fillers operating in conjunction with platform

barrier systems .................................................................................................................................... 34

6 Testing and verification of platform barrier systems ........................................................... 34

6.1 General.................................................................................................................................................... 34

6.2 Type tests ............................................................................................................................................... 35

6.3 Routine tests ......................................................................................................................................... 35

6.4 Functional testing of the platform barrier system ................................................................. 35

6.5 Integration testing of the barriers with other railway subsystems ................................. 35

---------------------- Page: 4 ----------------------
oSIST prEN 17168:2020
prEN 17168:2019 (E)

Annex A (normative) Testing plan.............................................................................................................. 36

Annex B (informative) Guidance on structural design ....................................................................... 39

Annex C (informative) Principles for earthing and bonding strategies ........................................ 43

C.1 Factors for consideration ................................................................................................................ 43

C.2 Principle A — The platform barrier system is bonded to station earth ......................... 43

C.3 Principle B — The platform barrier system is insulated from station earth and also

from the traction current return rail (i.e. floating) ................................................................ 44

C.4 Principle C — The barrier system is bonded to the traction return rail and insulated

from station earth .............................................................................................................................. 44

C.5 Principle D — The platform barrier is constructed of non-conductive materials ...... 46

Annex D (informative) System integration ............................................................................................ 48

D.1 Purpose .................................................................................................................................................. 48

D.2 Responsibility ...................................................................................................................................... 48

D.3 Overall targets ..................................................................................................................................... 48

D.4 Specific considerations ..................................................................................................................... 48

D.4.1 Integration with railway control systems and with train operation ............................... 48

D.4.2 Control system – conditions for opening/closing of doors/gates ..................................... 48

D.4.3 Accuracy of stopping ......................................................................................................................... 50

D.4.4 Alignment .............................................................................................................................................. 50

D.4.5 Visibility of platform-train interface ........................................................................................... 50

D.4.6 Other physical considerations ....................................................................................................... 51

Annex E (informative) Guidance on aerodynamic loading from trains ....................................... 52

E.1 Introduction ......................................................................................................................................... 52

E.2 Technical basis and method ........................................................................................................... 52

E.3 Calculation of equivalent pressures ............................................................................................ 52

Bibliography ....................................................................................................................................................... 54

---------------------- Page: 5 ----------------------
oSIST prEN 17168:2020
prEN 17168:2019 (E)
European foreword

This document (prEN 17168:2019) has been prepared by Technical Committee CEN/TC 256 “Railway

Applications”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
---------------------- Page: 6 ----------------------
oSIST prEN 17168:2020
prEN 17168:2019 (E)
Introduction

Platform barrier systems provide a movable barrier between trains and other guided transit vehicles,

and passengers waiting at stations and boarding points.

Platform barrier systems are used increasingly on metro and other rail networks to ensure the safety of

passengers on the station platform who are waiting to board vehicles. Such systems are also used on

“people-mover” guided systems for short-distance transits, for example at airports. Their use is

recommended by EN 62267 for any fully automated transit system.
In particular platform barrier systems can be used to control the risk of:

• incursion by passengers or other persons on the railway track (deliberate or accidental); and

• contact between passengers and moving vehicles.

These risks can be especially significant where there is the possibility of overcrowding on station

platforms at busy locations. Barriers may increase the safely useable space in the station for passengers

waiting and circulating on the platforms.

Platform barrier systems integrate the operation of the platform barrier doors and gates with opening

and closing of train doors and also assist in the management of station operations, to safely permit higher

speeds for trains entering and exiting the stations.

Barrier installations can also be part of a continuous partition between the running tracks and the station

areas for the purposes of:
• fire safety (including smoke management);
• tunnel and station ventilation (including reduction of the piston effect);
• trackside noise reduction; and
• passenger comfort at climate-controlled stations

Additionally, the terminology used in connection with platform barrier systems, in particular to improve

the specification and understanding of safety requirements, should be standardized.

---------------------- Page: 7 ----------------------
oSIST prEN 17168:2020
prEN 17168:2019 (E)
1 Scope

This document specifies requirements for the design, construction and operation of platform barrier

systems positioned at the edge of a station platform immediately adjacent to the rail or other guided

vehicles in stations and boarding points for passenger services. This document includes:

• requirements for the fixed structure and fixed parts along the platform;

• physical requirements for the movable doors and gates normally used by passengers;

• requirements for emergency doors;
• requirements for driver access doors;
• requirements for platform extremity doors; and

• requirements for the management of safety risks that are particular to barrier systems.

This document also gives requirements for the integration of barriers within the overall rail system,

including:
• synchronization of vehicle and platform barrier doors or gates;
• audible and visible alerts;
• integrity of control systems;
• testing of the barrier installation;
• operational performance; and

• requirements relating to other interfacing sub-systems, notably signalling and vehicles.

For barrier systems set back from the platform edge, which are used to control access to trains or for

crowd management, relevant sections of the document can be used as guidance.

This document applies to all persons involved in the implementation and system integration of a platform

barrier system, including infrastructure owners, designers, installers and operators.

This document does not cover barrier systems using bars, ropes, etc. or which operate in a vertical

direction.

This document applies to light rail services, e.g. metro and tramway systems and heavy rail services as

requested by a project specification. It applies to small systems, working in conjunction with a single

vehicle, or with larger systems working with a complete train.

This document applies to platform barrier systems used at sub-surface stations, enclosed surface stations

(e.g. those enclosed for the purposes of providing an air-conditioned environment for waiting

passengers), and those fully in the open-air.

This document does not cover normative requirements relating to fire performance or fire requirements

arising from use of platform barrier systems as fire barriers.
---------------------- Page: 8 ----------------------
oSIST prEN 17168:2020
prEN 17168:2019 (E)
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

EN 1090-2, Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel

structures

EN 1090-3, Execution of steel structures and aluminium structures - Part 3: Technical requirements for

aluminium structures

EN 1125, Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes -

Requirements and test methods
EN 1990:2002, Eurocode - Basis of structural design

EN 1991-1-1:2002, Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight,

imposed loads for buildings

EN 1991-1-4, Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions

EN 1993-1-1, Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings

EN 1993-1-9, Eurocode 3: Design of steel structures - Part 1-9: Fatigue

EN 1998-1, Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic

actions and rules for buildings

EN 1999-1-1, Eurocode 9: Design of aluminium structures — Part 1-1: General structural rules

EN 1999-1-3, Eurocode 9: Design of aluminium structures – Part 1-3: Structures susceptible to fatigue

EN ISO 12543-1, Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and

description of component parts (ISO 12543-1:2011)

EN 12600, Glass in building - Pendulum test - Impact test method and classification for flat glass

EN 13272, Railway applications - Electrical lighting for rolling stock in public transport systems

EN 13501-1, Fire classification of construction products and building elements - Part 1: Classification using

data from reaction to fire tests

EN 13501-2, Fire classification of construction products and building elements - Part 2: Classification using

data from fire resistance tests, excluding ventilation services

EN 13501-6, Fire classification of construction products and building elements - Part 6: Classification using

data from reaction to fire tests on power, control and communication cables

EN 14752:2015, Railway applications - Body side entrance systems for rolling stock

EN 16584-1, Railway applications - Design for PRM use - General requirements - Part 1: Contrast

---------------------- Page: 9 ----------------------
oSIST prEN 17168:2020
prEN 17168:2019 (E)

EN 16584-3, Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction

characteristics

EN 50121-4, Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the

signalling and telecommunications apparatus

EN 50122-1:2011, Railway applications - Fixed installations - Electrical safety, earthing and the return

circuit - Part 1: Protective provisions against electric shock

EN 50122-2, Railway applications - Fixed installations - Electrical safety, earthing and the return circuit -

Part 2: Provisions against the effects of stray currents caused by d.c. traction systems

EN 50126-1:2000, Railway applications — The specification and demonstration of Reliability, Availability,

Maintainability and Safety (RAMS) — Part 1: Basic requirements and generic process

EN 50128, Railway applications - Communication, signalling and processing systems - Software for railway

control and protection systems

EN 50129, Railway applications — Communication, signalling and processing systems — Safety related

electronic systems for signalling

EN 50162, Protection against corrosion by stray current from direct current systems

HD 60364-4-41, Low-voltage electrical installations — Part 4-41: Protection for safety — Protection

against electric shock

HD 60364-5-54, Low-voltage electrical installations - Part 5-54: Selection and erection of electrical

equipment - Earthing arrangements and protective conductors
HD 60364-6, Low-voltage electrical installations - Part 6: Verification
EN 60529, Degrees of protection provided by enclosures (IP Code)

EN 61000-6-2, Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial

environments

EN 61000-6-4, Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for

industrial environments

EN 61140, Protection against electric shock - Common aspects for installation and equipment

EN 62061, Safety of machinery - Functional safety of safety-related electrical, electronic and programmable

electronic control systems

EN 62290-2:2014, Railway applications - Urban guided transport management and command/control

systems - Part 2: Functional requirements specification
EN 62305-1, Protection against lightning - Part 1: General principles
---------------------- Page: 10 ----------------------
oSIST prEN 17168:2020
prEN 17168:2019 (E)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1
correct alignment

correct position of the doors of the vehicle relative to the corresponding platform barrier doors/gates, to

permit safe and efficient transfer of passengers between vehicles and platform
3.2
doorway

section of a platform barrier through which passengers can board or alight from vehicles when platform

doors or gates are open
3.3
driver access door/gate

openable panel in a platform door or gate system designed to align with the driving cab door of a train

stopped at the station or boarding point

Note 1 to entry: Such panels (if provided) can open with a hinged or sliding action.

3.4
emergency egress device

operating element for manual opening from the trackside, in case of emergency, of any type of platform

door or gate
3.5
emergency egress door/gate

panel in a platform door or gate system which can be opened in an emergency, or if the vehicle(s) are not

in correct alignment with the platform doors/gates

Note 1 to entry: Emergency egress doors/gates can be of any design - hinged/sliding/push-out, etc.

3.6
entrapment

trapping of a person between the vehicle bodyside and the platform barrier after the vehicle and platform

doors or gates have been closed
3.7
façade
complete framework and panels (fixed and moving) of the platform barrier
3.8
finished floor level

level of the platform floor when all surface finishes (e.g. tiles, screed, threshold) have been applied

---------------------- Page: 11 ----------------------
oSIST prEN 17168:2020
prEN 17168:2019 (E)
3.9
glazing

glass or equivalent transparent material fixed in frames as part of a platform barrier system

3.10
leading edge
vertical edge of a door or gate, leading during closing movement
3.11
local control panel

centralized control panel adjacent to or in the vicinity of the platform barrier which enables opening and

closing of a complete set of doors/gates in a barrier system by a member of operations staff

3.12
mechanical gap filler

movable device mounted at the platform edge, at a platform door or gate, fully automatic and

actuated/controlled in conjunction with the barrier system opening/closing sequences

Note 1 to entry: The purpose of a mechanical gap filler is to reduce the horizontal stepping distance to a vehicle to

acceptable limits, or to facilitate access to a vehicle by persons with reduced mobility. Its structural integrity does

not rely on support from the vehicle.
3.13
operations staff

persons including train crew and station personnel authorized to perform tasks concerning train

operation or direct service to passengers
3.14
passive gap filler

strips, of frangible or partly flexible material attached to the barrier doorway threshold such that the

clearance between a moving vehicle and the threshold can be safely reduced below that normally

specified for gauge clearance between infrastructure and vehicles
3.15
person with reduced mobility (PRM)

person whose mobility when using transport is reduced due to any physical disability (sensory or

locomotory, permanent or temporary), intellectual disability or impairment, or any other cause of

disability, or as a result of age, and whose situation needs appropriate attention and adaptation to his or

her particular needs of the service made available to all passengers
[SOURCE: EU Directive 2007/1371/EC]
3.16
platform

section of pathway, alongside rail tracks at a railway, metro or other guided transit system station at

which passengers can board or alight from vehicles
3.17
platform barrier system (PBS)

system providing a protective barrier between vehicle and platform, having power operated movable

panels with associated drive and control equipment, such panels moving horizontally and parallel with

edge of the platform, allowing passenger transfer through the barrier when a train is positioned at the

platform
---------------------- Page: 12 ----------------------
oSIST prEN 17168:2020
prEN 17168:2019 (E)
3.18
platform door

movable panel or panels and forming part of a platform door system through which passengers normally

access and egress vehicles
3.19
platform door system

platform barrier system in which the movable panels are carried on a portal structure having headers or

lintels above the moving panels, carrying all or part of their weight

Note 1 to entry: Such a system can form part of a structure completely enclosing the platform area and separating

it entirely from the track on which vehicles move.
3.20
platform extremity door/gate

panel at the extremity of a platform door or gate system (usually, but not necessarily, at right angles to

the main structure) to allow access by authorized persons to the track, or to a tunnel walkway beyond

the station, or as emergency egress for persons evacuating from the track area
Note 1 to entry: Such panels can open with a hinged or sliding action.
3.21
platform gate

movable panel or panels forming part of a platform gate system through which passengers normally

access and egress vehicles
3.22
platform gate system

platform barrier system in which the movable panels are supported from the bottom, or by cantilever

arrangement at an intermediate height on the barrier
3.23
routine test

conformity test made on each individual item of equipment during or after manufacture

3.24
station

unit comprising buildings and structures containing technical equipment, loading or unloading areas or

platforms, and any associated areas for reception and shelter
3.25
synchronization (of doors)
co-ordinated movement of vehicle doors with platform doors or gates
3.26
system integration

process of assuring that the design, installation and operation of the barrier system is consistent with the

overall safety and operational targets of the complete rail system, of which the barrier system is part

Note 1 to entry: The activity of system integration (particularly in the context of this standard) is elaborated on in

Annex D (informative).
---------------------- Page: 13 ----------------------
oSIST prEN 17168:2020
prEN 17168:2019 (E)
3.27
train
combination of rolling stock coupled together
[SOURCE: IEC 60050-811: 2017]
3.28
type test

conformity test made of one or more system and its components representative of the production to

prove that the design meets the standard and the relevant specifications
3.29
user population

range of persons (including operations staff) expected to use a platform barrier system, defined in terms

of their physical characteristics
4 System design requirements
4.1 Physical and structural requirements of the platform barrier
4.1.1 General structural requirements

4.1.1.1 Platform barrier systems form a safety barrier separating customers/passengers from

moving trains until it is safe to grant access. As such they shall be designed to resist crowd loading.

Platform barriers are also subject to aerodynamic loads induced by trains passing the structure. Platform

barrier systems installed in open sections shall also resist wind loading. In addition, platform barrier

systems might be subject to pressures generated by tunnel ventilation systems and might be required to

resist earthquakes. These separate actions shall be combined in accordance with Structural Eurocodes

referenced in this standard.

4.1.1.2 Tunnel ventilation systems are normally associated with platform barrier systems that

completely enclose th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.